Stooge Spring Fling

I'm planning to do that next Wednesday. Ill bring a copy of the test.

 

I have a loose set of oem cats I can loan for the day, and a Motiv pressure bleeding system for those who want to bleed their brakes.

I may also bring a coil plug kit to look at or perhaps even install if it works out.

Anybody happens to have an SD2? Willing to pay for time on it to adjust the PIS on my f1 system.

Oh, and we'll be showing off the latest and greatest Gothspeed exhaust system!

Cheers

Sent from my SGH-M919 using Tapatalk

 

Just put one together with an MSD box also with denso COPs. Doing the wire harness now

 

I had mine many many years ago, installed it but had some misfiring issues with it. I think it is due to some crosstalk in the wiring harness. I've taken it out since, and have meaning to redo the harness. I'll see if I can do so in the next few weeks.

Bring your system si we can compare notes.

Sent from my SGH-M919 using Tapatalk

 

Dis 4 box with denso ninja COPs. I'll bring a copy of the wire diagram I am using to compair

 

Cool! Same here. I think I have the DIS 4 plus withi 8 denso cops which actually fit underneath the spark plug cover on the valve cover. I also have the tach adapter wired in, but not sure if i need that or not.

;-)


Sent from my iPad using Tapatalk

 

OK great
I know the wire harness must be 100% correct and protected from RF

We'll get them sorted for sure

 

We're in Rolling Hills Estates. Near PV Drive E and N. If you need more PM me. But honestly if you can get to that intersection you could walk it.

 

Tim and Alex have you consulted with cribbj? He worked out the bugs for the 550. We are talking "work of art!"

 

The envy of everyone at the party!

 

Geez!
New product introductions.
Tech sessions
Mille Miglia report
Electronics workshops
Cosmetics workshops
Food & drink
The largest assembly of 348s and 355s west of Maranello
Sounds like SEMA for the Brotherhood at Vince's convention center!
FREE!

 

What time does this get going ? Vince can you PM me your address, thanks.

 

If I finish rebuilding my A/C compressor this weekend I'll bring it along if Carl still has his tank of R12 and I can buy a few pounds from him.

Bruce, was I supposed to get a package from you? Haven't seen anything in the mail, but I'll bring some blank chips and equipment with me if we need to make some. We should be able to compile enough baseline info to make this the summer of 2.7 chip tuning and massive HP gains, lol.

 

Maybe start a tools list in this thread if people are going to do stuff but don't have tools. My R12 tank was sold but I got the manifold gauge set to charge it. Lets start early in the session to suck it down for as long as possible.

 

List up I have tons of tools also

 

Thanks, I don't have a manifold gauge set. Turns out I know the Stooge that bought your R12 tank so that will be along as well.

Had a good chat with Vince yesterday and we related some interesting facts about the ECU chips we have discovered. Turns out matched sets of ECUs can have different versions of the chips in them even though they have the same part #'s. I'm going to bring along some equipment to verify this at the code level.

I'll also be bringing along my EPROM writing equipment and some blank 100ns automotive chips. These run faster than the stock Bosch chips and tend to smooth out some of the irregularities guys have experienced with the OEM chips. I'll be able to produce matched chip sets for 2.5 and 2.7 systems (including 1995 355s) during the Stoogefest if anyone wants them.

I'm hoping to collect as many chip code samples as possible during the day so we can build up a database of versions and get solid baseline info for future chip tuning specific to our upgrades.

I've got a number of Hill Engineering tools, so if anyone is going to be digging into their clutch or other specialty work LMK and I'll bring them. I've also got JB Weld if anyone needs that!

 

Wow!

 

Cool I will bring the last version of ecus with same part no. And you can compare.

 

Would also be interesting to collect 2.7 355 data. Maybe we can get more out of the 2.7 vs the 5.2. 355.

 

Will need the address as well Vince. Thanks, Henry

 

12. RSO1091, He who cometh the furthest (most likley-est)

 

Keep 355rockit occupied with beer and wings while I crack open his ECUs!

 

1. Vvassallo, host, peacock whisperer, roaster of fowl
2. El Grande WilliamRobert, god of chickenwings.
3. Plugzit, he who telleth tall tales.
4. TrojanFan, sayer of "what is hot and what is not"
5. That guy, newbie tamer of the "Bushmobile"
6. SoCal1, They let me out once a season
7. 3forty8, bringing the CHIPS and DIP(28)
8. darkkaangel, bringing the cookies
9. f129b, low-ridin'
10. Calder1 , bringing knowledge and lies about the Mille
11. 355rockit, bringing the art of pampering a happily driven F355... and chips/dessert
12. RSO1091, He who cometh the furthest (most likley-est)
13. Armenhaz, will bring beer and want to see that smoke machine!

 

Armen, is Ross tagging along with you? I believe 360 owners are welcome.

 

I'd like to hear more about this. Are the new chips tuned for better performance?