Decided to give my F355 Berlinetta some TLC.....

Hi I have not got round to it yet, been away, but will get on to it soon.

 

Cool thanks for the tip, much appreciated

 

The manual arrived from Australia today, now i have the perfect set of books! Thanks Steve.
Image Unavailable, Please Login

 

Hi, i cleaned up the radiator fans today, lubricated and tested, fortunately thy are working perfectly, spinning up with loads of power and the motors are very quiet!

Second Picture - Question: It say on the fan "REMOVE THE CAP FROM THE CONDENSATE DISCHARGER"

Third Picture - on the fan motor cover there is a small hole, on one radiator it had a white cap in the hole, the other did not, just as the picture - what should be the situation?

thanks
Mark
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Hi, the new carbon wheel centre caps for the challenge wheels arrived today, they fit perfectly in the Speedlines.
Image Unavailable, Please Login
Image Unavailable, Please Login

 

I am busy stripping, cleaning and rebuilding the brakes and suspension at the moment, so far front suspension needs new bushes and the springs shot blasted and powder coated, struts are in good shape. Rear suspension all looks fairly new and is in perfect condition.

The brakes, well they had seen better days! Need new discs and pads all round. The handbrake shoes were shot, guess they have been original, need a new hand brake cable as well. All the callipers have been striped, checked, cleaned and rebuilt. The car had fairly new Goodrich braided hoses all round, so thats the only thing that did not need replacing!
Oh, and one of the orange brake duct cooling hoses had fallen to pieces, other one was perfect - picked up a replacement today.
Pictures to follow.

 

I know, i cant wait, i have a feeling they will look awesome. Only problem, the car is on jack stands while i finish the wheel arches, brakes and suspension. I cant get full access to the front boot as i parked it partly below a small tree, which is now even closer as the car is 2 foot in the air on the stands!

 

They were advertised on ebay, i contacted the seller and we done a deal and he ended the auction. Fair bit of work to get them like this: X - rayed, full refurb in the same colour as the Scuderia strip, new Speedline decals, new valves, new centre caps, new tyres and balanced.

Oh nearly forgot, and new Hill Engineering 11mm wheel spacers and a set of 20 new longer bolts - so the whole thing has been quite an expensive indulgence, but i love the result!

 

Hi, I have been giving the orange brake ducting pipe a good clean up. One of the pipes is in great shape, but the other one is not so good. It looks ok, but the internal spring has broken in several places, so it had lost its shape and integrity. The replacement part from Ferrari is just to expensive for what it is, so i came up with a repair.

I got a length of replacement pipe, from a great friend and Ferrari legend Aldo Riti. The problem with the new pipe, it does not have the rubber welded ends, so i removed the old spring from the original, trimmed the new one to the right length and shortened the internal spring at each end by the correct distance. Then slipped the new pipe inside the old one, put both ends over the plastic ducting and metal exit bracket - job done!

The ducting is secured at the hub end with jubilee clips - the originals cleaned up like new. But at the other end they are secured by a different sort of clip - the originals were very tatty and rusty. Got this great replacement from another friend, 5 minutes latter i had 2 new clips made-up and fitted, absolutely perfect and identical to the original.
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

gave them a polish up, looking a lot better.
Image Unavailable, Please Login

 

I removed the springs to be blasted and recoated, so while it was all apart i cleaned up the rest of the front suspension strusts. I have a set of new bushes lying in the box, i will press them in today.
Image Unavailable, Please Login

 

Hi, yes the service was superb, sorry if it was on my recommendation, but i am sure they will put it right very quickly.

 

Hi, i have my own workshop at my house, but have a connection with a fairly large Ferrari workshop near by and have pretty good access to what ever i need.

 

I have striped out the front boot to give it a thorough clean, I had to remove the top half of the carpet to get the suspension dampers out, so thought i would go the full distance.

Just cleaned up and repainted the carpet retaining strips in the correct semi-matt black...
Image Unavailable, Please Login

 

On the to-do list along with lubricating the window runners

 

Pressed the old ones out and the new ones in, ready to refit the springs then back into the car. Then I will finish refitting the front brakes and refit the wheel arch covers. Hopefully have it back on its wheels shortly and I can get I on with some of the more visually impacting jobs!
Image Unavailable, Please Login