360 Spider Slim Line Enclosure | FerrariChat

360 Spider Slim Line Enclosure

Discussion in '360/430' started by SoftwareDrone, May 26, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. SoftwareDrone

    SoftwareDrone F1 Veteran Sponsor Owner

    Joined:
    Jan 19, 2004
    Messages:
    7,861
    Location:
    San Jose, California
    Full Name:
    Mike
    I know, this has been a long time coming.
    I worked on this prototype all day today. It looks like I can barely wedge a JL Audio 8" subwoofer into an enclosure that completely clears the seats. No interference whatsoever. These will be more expensive but if you need every millimeter of seat space, this enclosure is for you.

    By the way, for those of you who are not aware of this, I have officially started a business and have become an official sponsor of FerrariChat. The name of the business is "Scuderia Audio". My banner will pop up at the top of the page from time to time.

    EDIT: I am also attaching a photo of the 360 coupe slim line enclosure so you can see what the finished product will look like.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    SoftwareDrone, May 26, 2014
    #1
  2. elmani

    elmani Formula Junior

    Joined:
    Oct 7, 2008
    Messages:
    253
    Location:
    austin Texas
    Full Name:
    marc b
    Lovely !
     
    elmani, May 26, 2014
    #2
  3. SLViper1

    SLViper1 Formula Junior Owner Silver Subscribed

    Joined:
    Mar 25, 2014
    Messages:
    767
    Location:
    Nashville/Destin
    Full Name:
    Steve
    I will take one for my 430 Spider
    Thanks
    Steve
     
    SLViper1, May 26, 2014
    #3
  4. whatheheck

    whatheheck F1 Rookie Owner

    Joined:
    Mar 27, 2006
    Messages:
    4,148
    Location:
    Seattle, Wa
    Full Name:
    Dan L.
    Absolutely beautiful!

    Great job!

    Dan
     
    whatheheck, May 26, 2014
    #4
  5. SoftwareDrone

    SoftwareDrone F1 Veteran Sponsor Owner

    Joined:
    Jan 19, 2004
    Messages:
    7,861
    Location:
    San Jose, California
    Full Name:
    Mike
    Thanks Steve.
    Send me what color leather you want, what color stitching and the number of stitches per inch of your existing leather so we can match, to [email protected].

    Can you give me a week? I have four orders in the queue and am working as fast as I can.

    :)
     
    SoftwareDrone, May 27, 2014
    #5
  6. ar4me

    ar4me F1 Rookie Owner

    Joined:
    Apr 4, 2010
    Messages:
    3,114
    Location:
    Southern California
    Full Name:
    Jes
    Congrats on becoming a sponsor and good luck with the business!
     
    ar4me, May 27, 2014
    #6
  7. SoftwareDrone

    SoftwareDrone F1 Veteran Sponsor Owner

    Joined:
    Jan 19, 2004
    Messages:
    7,861
    Location:
    San Jose, California
    Full Name:
    Mike
    So, I am determined to figure this out. I may have to make some notches in the sides of the enclosure but I think it will still look good.
    Any 430 owners reading this, I could use a couple of measurements. I need to know the distance between the two inner seat adjustment knobs and distance between the two inner seat back flip up levers. I am having the hardest time getting my hands on a 430 these days.
    Any help would be appreciated.
    :)
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    SoftwareDrone, May 29, 2014
    #7
  8. SoftwareDrone

    SoftwareDrone F1 Veteran Sponsor Owner

    Joined:
    Jan 19, 2004
    Messages:
    7,861
    Location:
    San Jose, California
    Full Name:
    Mike
    Got the measurements. Thanks guys!
    :)
     
    SoftwareDrone, May 29, 2014
    #8
  9. SoftwareDrone

    SoftwareDrone F1 Veteran Sponsor Owner

    Joined:
    Jan 19, 2004
    Messages:
    7,861
    Location:
    San Jose, California
    Full Name:
    Mike
    Guys, I need a couple more 430 measurements as I need more than one data point.
    I need the distance between the firewall floor and the bottom of the rear glove box. I am getting everything from 7 3/4" to 9".
    I also need the distance from the firewall to the back of the center console. I am seeing 9 1/2" and 10". Ideally, I would get a measurement from a leather center console car and a carbon fiber center console car.
    Thank you.
     
    SoftwareDrone, May 30, 2014
    #9
  10. SoftwareDrone

    SoftwareDrone F1 Veteran Sponsor Owner

    Joined:
    Jan 19, 2004
    Messages:
    7,861
    Location:
    San Jose, California
    Full Name:
    Mike
    I had to make some major adjustments to the prototype. Clearing those lower seat adjustment knobs took some major surgery. Just making notches to clear the knobs made it look stupid, but continuing the notch all the way down to the bottom was the ticket. Now the prototype clears the seats in any position.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    SoftwareDrone, Jun 1, 2014
    #10
  11. djastral69

    djastral69 Formula 3 Silver Subscribed

    Joined:
    Aug 6, 2007
    Messages:
    1,896
    Location:
    Fl
    Full Name:
    David
    Fantastic work, Good luck with the business as well...
     
    djastral69, Jun 1, 2014
    #11
  12. mikelong

    mikelong Karting

    Joined:
    Dec 17, 2012
    Messages:
    115
    Mike, I am locate in San Jose as well.
    Would you mind if I can pay you a visit to check out your shop?
    Please PM me when you become available.
    thanks
     
    mikelong, Jun 3, 2014
    #12

Share This Page