355 ashtray | FerrariChat

355 ashtray

Discussion in '348/355' started by nunojcmaia, Oct 21, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. nunojcmaia

    nunojcmaia Formula Junior

    Joined:
    Dec 16, 2004
    Messages:
    389
    Location:
    porto - portugal
    Full Name:
    nuno maia
  2. butcher

    butcher Formula 3

    Joined:
    Oct 19, 2008
    Messages:
    2,339
    Location:
    Castro Valley, CA
    Full Name:
    Albert
    Robbie at Sticky No More would know if the 360 ash tray fits in 355. In fact, even better...Sticky No More probably has 355 Ash trays that they can sell you.
     
  3. mseals

    mseals Two Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Sep 9, 2007
    Messages:
    24,468
    Location:
    Kuwait
    Full Name:
    Mike Seals
    64234600 is the part number for the 355 ashtray. and, it was only used on the F355.

    For the 360, it's 67505800, and was used on the 360, 550, and F430.

    I think you would find that the part would cross-reference to both vehicles if it would fit both.

    Mike
     
  4. bcwawright

    bcwawright F1 Veteran

    Joined:
    Jul 8, 2006
    Messages:
    5,234
    Location:
    Georgia
    Full Name:
    Bruce
    Yes there is a really really big difference between the 360 and 355 ashtrays....the difference is so enormous that only a super skilled 5 year old can master...it is called rotating the flags 180 degrees...
     
  5. 285ferrari

    285ferrari Two Time F1 World Champ Sponsor

    Joined:
    Sep 11, 2004
    Messages:
    20,961
    Location:
    MD and NE
    Full Name:
    Robbie
    They are fairly different, the 355 has grooved slots on the side to fit the mirror switch trim, the others do not. But the others will work if you glue/silicone the trim on beside the ashtray. The flags are the same on both models. The 355 is usually $200 more in cost also.
     
  6. bcwawright

    bcwawright F1 Veteran

    Joined:
    Jul 8, 2006
    Messages:
    5,234
    Location:
    Georgia
    Full Name:
    Bruce
    Last edited by a moderator: Sep 7, 2017
  7. yronZFF

    yronZFF Formula Junior Owner

    Joined:
    Dec 21, 2009
    Messages:
    749
    Location:
    FIVE-O
    Full Name:
    Ron
    I don't know about the 360 but my 430 ashtray lid is plastic and my 355 was made of metal. Probably why the 355 cost so much more.
     
  8. Shootfighter65

    Shootfighter65 Formula 3

    Joined:
    May 13, 2014
    Messages:
    1,372
    Location:
    Charleston SC
    Full Name:
    Randy..alluneedtokno
    How do you rotate the flags? mine looks like the correct 355 ashtray but the flags are upside down...I have tried putting pressure on them to spin them around but didnt want to break them.
     
  9. mseals

    mseals Two Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Sep 9, 2007
    Messages:
    24,468
    Location:
    Kuwait
    Full Name:
    Mike Seals
    There are two small nuts on the back that hold the flags in on posts. Unscrew those, flip the flags, and replace the nuts.

    Mike
     
  10. Shootfighter65

    Shootfighter65 Formula 3

    Joined:
    May 13, 2014
    Messages:
    1,372
    Location:
    Charleston SC
    Full Name:
    Randy..alluneedtokno
    I should have looked first I assumed they were epoxied...what an idiot
     
  11. 285ferrari

    285ferrari Two Time F1 World Champ Sponsor

    Joined:
    Sep 11, 2004
    Messages:
    20,961
    Location:
    MD and NE
    Full Name:
    Robbie
    Later ashtrays were plastic, some of the later year 360 and all 430 models. Much better design than the metal lidded ones
     

Share This Page