LM002 RHD Rolling restoration.. will be updated regularly | Page 32 | FerrariChat
Buy

LM002 RHD Rolling restoration.. will be updated regularly

Discussion in 'LamborghiniChat.com' started by BlueBiturbo, Apr 28, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 32 of 57
  1. nickinafrica

    nickinafrica Karting

    Oct 10, 2013
    164
    Spain
    Full Name:
    Nick Petty
    #776 nickinafrica, Oct 22, 2014
    As I have just re-fitted my dash, it is all fresh in my mind!!!! stupid design, you have to remove the steering column to get the dash panel out without bending the piece that holds the wipe/wash stalk!!!! not clever.
     
  2. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #777 BlueBiturbo, Oct 22, 2014
    I think mine is missing that leather part under the dashboard/steering column
     
  3. Lambrusco V12

    Lambrusco V12 Karting

    Apr 17, 2013
    248
    Jakarta, Indonesia
    Full Name:
    Tony
    #778 Lambrusco V12, Oct 22, 2014

    Another Lambrusco moment , the Lambo guys do things like this after a 4 hour lunch
     
  4. nickinafrica

    nickinafrica Karting

    Oct 10, 2013
    164
    Spain
    Full Name:
    Nick Petty
    #779 nickinafrica, Oct 22, 2014
    If you look at the first page you posted, there is a picture showing the drivers side with the panel in place!!!! Looks like it has the switch attached to it.
     
  5. nickinafrica

    nickinafrica Karting

    Oct 10, 2013
    164
    Spain
    Full Name:
    Nick Petty
    #780 nickinafrica, Oct 22, 2014
    Sorry, I think you are talking about to the left of the steering column, yes there looks to be a piece missing, but it would be easy to make one up and give it to your trimmer to cover.
     
  6. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #781 BlueBiturbo, Oct 22, 2014
  7. taz55555

    taz55555 Karting

    Jun 22, 2014
    104
    Maryland
    #782 taz55555, Oct 22, 2014
    They should make a wood LM002.

    Nice pictures of the back seats.
    Looking for the rubber caps over the door hinges.

    Regards,

    Taz
     
  8. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #783 BlueBiturbo, Oct 22, 2014
    Last edited by a moderator: Sep 7, 2017
  9. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #784 BlueBiturbo, Oct 22, 2014
    Taz,

    Can You make the door hinges cap from plastic or teflon ?
     
  10. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #785 BlueBiturbo, Oct 22, 2014
    Question on speedometer ?

    Where is the place for speedo pickup sensor on the gearbox ?
    Anyone knows or can take the picture?
     
  11. nickinafrica

    nickinafrica Karting

    Oct 10, 2013
    164
    Spain
    Full Name:
    Nick Petty
    #786 nickinafrica, Oct 23, 2014
    It should be located around the output shaft (rear) on the transfer box, if you get stuck, I will take a look on mine.
     
  12. taz55555

    taz55555 Karting

    Jun 22, 2014
    104
    Maryland
    #787 taz55555, Oct 23, 2014
    Taffy:

    Made out of Rubber.
    Nice seats.

    Taz
     
  13. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #788 BlueBiturbo, Oct 24, 2014
    Last edited by a moderator: Sep 7, 2017
    I still think the width of 315/70-17 looks tiny compared to 345/60-17.
    Too bad no other factory made that tire size except Pirelli (at an irrational price).
    Image Unavailable, Please Login
     
  14. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #789 BlueBiturbo, Oct 24, 2014
    Last edited by a moderator: Sep 7, 2017
  15. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #790 BlueBiturbo, Oct 24, 2014
    I will measure the real width tomorrow and see the difference
     
  16. DennisForza

    DennisForza Formula 3

    May 23, 2006
    1,814
    Arlington, VA
    Full Name:
    Dennis
    #791 DennisForza, Oct 24, 2014
    I am surprised BFG won't make a 345. Have you tried the 37x12.50R17/D?
     
  17. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #792 BlueBiturbo, Oct 24, 2014
    37 is too tall... the original tires are 33 inch
     
  18. Lambrusco V12

    Lambrusco V12 Karting

    Apr 17, 2013
    248
    Jakarta, Indonesia
    Full Name:
    Tony
    #793 Lambrusco V12, Oct 25, 2014
    Surprisingly 315 tire track width is only 255mm and total width is 280mm while the Pirellis track width is 345mm and total width is 385mm. HUGE difference
     
  19. marcosass86

    marcosass86 Rookie

    Nov 10, 2013
    1
    #794 marcosass86, Oct 26, 2014
    hello,

    i have been following this feed and i must tell you the job you have done is amazing!!

    can you post more interior pictures??

    Thank you and good luck
     
  20. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #795 BlueBiturbo, Oct 26, 2014
    Thank You Marcosass86,
    I will post the pics tomorrow.
     
  21. nickinafrica

    nickinafrica Karting

    Oct 10, 2013
    164
    Spain
    Full Name:
    Nick Petty
    #796 nickinafrica, Oct 27, 2014
    I have been working or the tire issue and yes the BFG 315 looks skinny compared to the Scorpion 345, but an alternative wide tire also needs to be reasonably low profile or they catch the foot well, I read in the Octane report on the LM002 from March 2014 that Lamborghini Service claimed that the tire was going back into production, I sent a mail to Pirelli U.K. about 3 months ago & they said NO
     
  22. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #797 BlueBiturbo, Oct 27, 2014
    I was thinking about changing the wheels and tires on the LM for daily use, using bigger diameter rims and more offset to make a better/smaller turning diameter.

    I think I will go with 20 inch wheels with 305/50-20 tire or 325/50-20.
    The height will be the same 32.5-33.0 inch total diameter.

    But when I check the OEM wheels today I was shocked, the 8 lugs OZ rims has PCD of 150mm.

    8x150mm PCD ? WTH ???

    http://www.crawlpedia.com/bolt_patterns.htm
     
  23. taz55555

    taz55555 Karting

    Jun 22, 2014
    104
    Maryland
    #798 taz55555, Oct 27, 2014
    We talked to a few Lambo dealers and the Lm tires are available.

    Found at least 3 sets of five tires for sale.

    Pm and will give the contact information.
    During the last run we bought 8 tires.

    Regards,

    Taz
     
  24. BlueBiturbo

    BlueBiturbo F1 Rookie

    May 19, 2004
    3,968
    Jakarta
    Full Name:
    TS
    #799 BlueBiturbo, Oct 27, 2014
    Thanks... Already PM You
     
  25. DennisForza

    DennisForza Formula 3

    May 23, 2006
    1,814
    Arlington, VA
    Full Name:
    Dennis
    #800 DennisForza, Oct 27, 2014
    The 37s are really only 35, which I thought was what the originals were. Good luck! Mickey Thompson likely have a size that works in height and width.
     
Page 32 of 57

Share This Page