Unreasonable cost of parts | FerrariChat

Unreasonable cost of parts

Discussion in 'Ad Archives' started by Enzojr, Oct 28, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Enzojr

    Enzojr F1 World Champ

    Joined:
    Dec 12, 2013
    Messages:
    14,001
    Location:
    West of PDX
    Full Name:
    Tomy
    97 355 part #63341400 buffer, dealer wants $63.78, Ricambi is a couple bucks less ....
    My Gawd this is a 1 inch piece of FRICKIN rubber that goes on the side on the engine compartment and acts as a buffer when you close the engine cover ....... Forget that.

    Reasonable is plug #14507987 a rubber plug that goes into the front tow hook hole and is only $2.16 at the dealer, the above mentioned other party wants over $6 bucks. Bought one.

    LH Handle #64830900 which my guess says 50-100 bucks minimum, is only $3.26 from the dealer. Bought one.

    So do your research before you purchase parts, and as always use Ferrarichat first ;)

    P.S. So still looking for the buffer at a reasonable cost ........ If there is such a thing lol
     
  2. Sleepy996

    Sleepy996 Karting

    Joined:
    May 1, 2014
    Messages:
    104
    Location:
    @MR.HOTEL_SLIPPERS
    Ferrari tax !
     
  3. yelcab

    yelcab F1 World Champ Consultant

    Joined:
    Nov 29, 2001
    Messages:
    13,555
    Location:
    San Carlos, CA
    Full Name:
    Mitchell Le
    Is that buffer a rubber piece with splits in it so that it can be screwed into the sheet metal?
     
  4. 355rockit

    355rockit Formula Junior

    Joined:
    Dec 1, 2010
    Messages:
    893
    Location:
    San Marcos, CA
    Full Name:
    Vas
    I think it is that rubber piece on the left and right side of the rear deck that reduces vibration and cushions the deck lid when closing. Both of mine have degraded and fallen off. Had a hard time finding replacments and just left it be.
     
  5. yelcab

    yelcab F1 World Champ Consultant

    Joined:
    Nov 29, 2001
    Messages:
    13,555
    Location:
    San Carlos, CA
    Full Name:
    Mitchell Le
    Porsche 911 Carrera, SC have those. You might find it cheaper there,
     
  6. yelcab

    yelcab F1 World Champ Consultant

    Joined:
    Nov 29, 2001
    Messages:
    13,555
    Location:
    San Carlos, CA
    Full Name:
    Mitchell Le
    Last edited by a moderator: Sep 7, 2017
  7. Enzojr

    Enzojr F1 World Champ

    Joined:
    Dec 12, 2013
    Messages:
    14,001
    Location:
    West of PDX
    Full Name:
    Tomy
    Last edited by a moderator: Sep 7, 2017
  8. 355rockit

    355rockit Formula Junior

    Joined:
    Dec 1, 2010
    Messages:
    893
    Location:
    San Marcos, CA
    Full Name:
    Vas
    Bought this from Ricambi thinking it was correct one, but it wasn't.
     
  9. 355rockit

    355rockit Formula Junior

    Joined:
    Dec 1, 2010
    Messages:
    893
    Location:
    San Marcos, CA
    Full Name:
    Vas
    Bingo!
     
  10. Eric C

    Eric C F1 World Champ Silver Subscribed

    Joined:
    Mar 20, 2009
    Messages:
    11,054
    Location:
    St. Louis, MO
    Full Name:
    Eric
    Try a body shop. They might be able to source some for a few bucks a pop.
     
  11. Enzojr

    Enzojr F1 World Champ

    Joined:
    Dec 12, 2013
    Messages:
    14,001
    Location:
    West of PDX
    Full Name:
    Tomy
    Don't think so, the other side just has a single hole so thinking push it in there.
     
  12. Enzojr

    Enzojr F1 World Champ

    Joined:
    Dec 12, 2013
    Messages:
    14,001
    Location:
    West of PDX
    Full Name:
    Tomy
    Last edited by a moderator: Sep 7, 2017
  13. GerryD

    GerryD Formula 3

    Joined:
    May 5, 2010
    Messages:
    2,442
    Location:
    North of TO
    Full Name:
    Guido
    They are $43 from the dealer and they come in packs of 2.
     
  14. Enzojr

    Enzojr F1 World Champ

    Joined:
    Dec 12, 2013
    Messages:
    14,001
    Location:
    West of PDX
    Full Name:
    Tomy
    Which one ?
    I am looking at a Ferrari Dealers invoice quote as we speak ...... Or text
    It says quantity "1" and costs $63.78
     
  15. DesertDawg

    DesertDawg Nine Time F1 World Champ Silver Subscribed

    Joined:
    Jan 25, 2010
    Messages:
    93,188
    Location:
    The Desert
    Full Name:
    DesertDawg
    This is why they go for $1k each... they know you will go completely nuts if you don't have the correct one.
     
  16. andyw355

    andyw355 Karting

    Joined:
    Jul 5, 2011
    Messages:
    72
    Location:
    Australia
    Full Name:
    Andy
    I made one out of rubber strips from Clark Rubber. Only a few bucks. Glued in place. Wasn't paying $60 for small piece of rubber!


    Sent from my iPhone using Tapatalk
     
  17. marioz

    marioz Formula 3

    Joined:
    Nov 21, 2003
    Messages:
    2,025
    Location:
    Cedar Mills,Ontario
    Full Name:
    Mario
    I paid $8.34 Canadian at dealer in 2008 for that buffer.

    I hope this price increase is not a sign of things to come.
     
  18. mwhitesell

    mwhitesell Formula 3

    Joined:
    Sep 17, 2006
    Messages:
    1,083
    Location:
    Atlanta
    Full Name:
    Mark
    I used some weatherstripping and made a couple. Even with both sides of oem ones, it still had a rattle. Now its perfect. It's basically just a piece of rubber.
     

Share This Page