Alternator Denso 101211-7780

Hi

I try to order an alternator Denso 101211-7780 for my 550.
I tried to order the alternator from an US company.
They offered worldwide shipping at the website but it's not possible to order shipping to germany at the checkout procedure.

Now i asked them to ship worldwide, and waiting for an answer.
If this is not possible, can anybody help me to get the alternator to germany ?

Payment will be transferred by me with shipping address to anybody's US address and the to me.

Daniel

 

Daniel- I can help. Do you have their phone number and info?

 

Hi Taz and Bill

Thanks for your offers to help.
The problem is, they write phone is not possible (see below)



I want to order this

Qty Item Total
1 Alternator - Denso style 12v 140a IR/IF (#10263) 100% New Aftermarket $113.71
Subtotal $113.71

from

New Alternators and Starters from Fleet Alternator Starter


Fleet Alternator Starter
2618-A Battleground Ave #102
Greensboro, NC 27408

to send an email [email protected]

336-298-1070
If you call this number, you will get a recording.
We only respond to emails


Daniel

 

Daniel, I'm assuming English isn't your first language, but the wording in that advertisement implies that the alternator is NOT genuine Denso, but an aftermarket, Denso "style" alternator. This is a nice way of saying it's a Chinese knockoff.

Since it'll probably cost you as much or more in shipping, as the price of the goods, you may want to consider going for a "real" Denso. I would expect a genuine article to cost around 2x that price, possibly more.

If you're already aware of what you're buying and are OK with it, my apologies for butting in, but many non anglophones, and even some native English speakers are fooled by the creative wording in adverts such as this. The clue is always the price - if it looks too good to be true, then it's not genuine.

 

Hi John

Many thanks for the tipp.
You are right, i didn't saw/understood this.

You saved me Money and Trouble !!!!
Thanks.

Can anyone tell me, where i get a original Denso, not the original Ferrari 100211-6492 but an original 101211-7780 which works fine like some guys here said ?
I can't find a source here in europe.

Oh, there is no hurry, still winter and snow here in Germany.


Daniel

 

Can you rebuild yours?

 

Mine is working, but i have a bearing noise from alternator or compressor.
Compressor is leaking too, so i decided to buy a new one. Compressor is here, ready for installing. In that step, i want to change the alternator also, so i can rebuild mine with new bearings and have a second in stock.

Daniel

 

Both compressors and alternators are rebuildable and there are quality sources out there that do it. Both are quite a bit more economical than purchasing replacements.

That alternator should be an easy one to have done locally. If the outer casing is still presentable, then have it done. It should last a lifetime. No need for spares...

 

Searched at google, but i can't find an original 101211-7780.
Seems that all offers are copies.

Found this
https://www.therobson.com/product/290-10218/&rel=ds&q=101211-7780

I wrote an email to the dealer with the question if this is an original Denso.
I will see.

If the linked alternator is an original rebuilded Denso, do i have to change the regulator ?


Johnny, seems that rebuilding my own alternator is the only way.



Daniel

 

Hi

Now i found an original Denso 101211-7780 here in Europe.
Cost 530 €, about 640 $.

Does anybody know, if the electronic regulator has to be changed, or can i use the alternator without changing anything ?

Daniel

 

Daniel, our alternators use a Transpo IN-220E regulator, which are available here: IN220E Voltage Regulator for Nippondenso ( Denso ) type Alternators - S-IG-L Terminals, A-Circuit, 14.5 Volt Set Point, as well as many places in Europe, I'm sure.

I would try the alternator "as is" first, and see if the ECU's throw any codes. If they're not happy with the new model, then change the regulator.

Note, Transpo have several different configurations of this regulator. Here's a brief explanation of the differences:

IN-220E:......Two wire round connection, 14.5v setpoint
IN-220SE:....One wire, round connection, self exciting, 14.5v setpoint
IN-220SEA:..One wire, round connection, self exciting, adjustable setpoint

 

Thanks John

Daniel

 

Hello
I bought a new REAL DENSO alternator for my 456m to Cannes F dealer for about 750euros an i hope it will last sixteen years like the when new at the factory.
Why I bought a genuine one ?
Because two rebuilt valeo and hella in 1400 km were failing on my BMW m3 last months
Poor quality of electrical components .The warranty was ok but i did 300km with the flat truck so it s better to get genuine Denso alternators versus rebuilt ones👏👏👏👏

 

Daniel, if you get stuck again, let me know. Since I am in Japan and Denso is a Japanese firm, maybe I can source one for you. Not sure if it is cost effective but at least it would be an option for you. You can communicate by posting here or by my email address under my informations.

w/ smiles
Jimmy

 

Correction: the IN-220E has a 3 wire, round plug. Some alternators use only 2 of the 3 wires, but our setup uses all 3.

 

I using the John Deere alternator with a soft start regulator. Can't remember the number of the regulator.

 

Pretty sure this is the one, other threads say the regulator is a Transpo IN220E:

Amazon.com: ALTERNATOR JOHN DEERE MARINE ENGINE 101211-7780: Automotive

 

These are on eBay as well. I also noticed a rebuild kit for $29.95...

 

Just fyi, this is not a Denso unit, from personal experience.
Bill
FL

 

I now see that these online options are all knockoffs. Wonder if any are of sufficient quality? Any idea what the real McCoy costs at a John Deere dealer?

Interchanges:
MFG# MFG NAME
AND0539
ARROWHEAD

ND101211-7780
ARROWHEAD (OEM)

12658
LESTER

290-438
PIC

027780
ANDRE NIERMANN

101211-7780
DENSO

A-8943
DIXIE

RE500226
JOHN DEERE

47-4411
MINNPAR

P861N
MPA SMALL MOTOR

90-29-5412
WILSON

90-29-5412
WILSON HD

 

? Any idea what the real McCoy costs at a John Deere dealer?


RE500226
JOHN DEERE

just spoke to John Deere in UK -
can be sourced in UK from Europe (Germany) - just been quoted £466 +VAT at 20%
they also have remanufactured - for £286 +20% VAT

 

And can get the alternative (useful lookup table on here too) here for £217:-
Alternator AND0539 John Deere Marine - Moto Electrical

 

I just did a rebuild of my Denso generator here in Luxembourg EU for €270 + 17% tax. This is the OEM generator with new parts and electrical components inside, I guess the rebuild or the refurbishment is a good solution for this part, for a reasonable price. A much better solution than a Chinese fake.

 

I tried to save a few bucks but what I think I got was a crappy Chinese part. This part failed at Cavallino 2015, necessitating a 140 mile tow home.

I bit the bullet and paid 900 bucks for a Ferrari OEM one with a two year warranty. No problem since.

Scott

 

So did i😉

Like i said on page 1 of this topic i prefered original which last so many years than bad replica products..