F430 Spider Workshop Manual | FerrariChat

F430 Spider Workshop Manual

Discussion in '360/430' started by RichardCH, Jan 1, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. RichardCH

    RichardCH F1 Rookie BANNED

    Joined:
    Jan 16, 2005
    Messages:
    4,661
    Does anyboy body know of a link to the F430 Spider Workshop Manual for a download, I can find the 360 Spider Workshop Manual but not the 430 Spider ?
     
  2. FerrariDublin

    FerrariDublin F1 Rookie

    Joined:
    Jun 14, 2009
    Messages:
    3,454
    Location:
    Dublin, Ireland
    Full Name:
    Greg
    I would be interested also if anyone can oblige?
     
  3. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,448
    Location:
    Winston Salem, NC
    I have it, but is is very incomplete. It is an early release with very limited details on the coachwork. Some of the mechanical sections simply say "To be completed" or some such nonsense.

    Is there a particular section you need?
     
  4. RichardCH

    RichardCH F1 Rookie BANNED

    Joined:
    Jan 16, 2005
    Messages:
    4,661
    At the moment, I need the bit to remove the 430 Spider air intake resonators, I can take the drip tray panels out of engine bay etc I need how to access the 8mm nuts which hold the resonator wire grills to into the rear wing (with the hole in it) as on the Spider there is no direct hand access like there is on the 430 coupe.

    Would also be interested in how to remove the Spider Roll Over Protection Bars/Hoops as I need to change the leather colour on mine
     
  5. scottg1

    scottg1 Rookie

    Joined:
    Sep 6, 2009
    Messages:
    12
    Location:
    North west, uk
    Full Name:
    Scott
  6. RichardCH

    RichardCH F1 Rookie BANNED

    Joined:
    Jan 16, 2005
    Messages:
    4,661
  7. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,448
    Location:
    Winston Salem, NC
    Last edited by a moderator: Sep 7, 2017
  8. RichardCH

    RichardCH F1 Rookie BANNED

    Joined:
    Jan 16, 2005
    Messages:
    4,661
    Daniel this is extremely helpful and I now know I have to take the wheel and respective wheel lining off to access these 8MM nuts on the Spider (unlike the Coupe). Would you have anything on the removing the Spider Rollover hoops/bars too ?
     
  9. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,448
    Location:
    Winston Salem, NC
    Last edited by a moderator: Sep 7, 2017
  10. RichardCH

    RichardCH F1 Rookie BANNED

    Joined:
    Jan 16, 2005
    Messages:
    4,661
    Daniel, also massively helpful thank you
     
  11. FerrariDublin

    FerrariDublin F1 Rookie

    Joined:
    Jun 14, 2009
    Messages:
    3,454
    Location:
    Dublin, Ireland
    Full Name:
    Greg
    Hi Daniel,

    In my case I'm just looking for some "light reading" :) ...... and I guess it's the likely next model for me whenever that will be.

    Is it possible to purchase the full manual anywhere do you know?

    Cheers.
     
  12. 458italias

    458italias Karting

    Joined:
    Sep 15, 2012
    Messages:
    148
    Location:
    Cleveland Ohio
    I need it so i can show the track the car has roll hoops so i can run on the track in a 430 spider


    really just looking to see that the factory calls it a roll over protection system on the car
     
  13. drrdo

    drrdo Rookie

    Joined:
    Jun 3, 2014
    Messages:
    3
    2007 Ferrari F430 Spider Owner's Manual, Section 2, Page 71 ..... depicts and labels "Roll-bars"
     
  14. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,166
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    ferraridatabase.com now has an early, incomplete F430 workshop manual.
     
  15. gsworld2014

    gsworld2014 Formula 3

    Joined:
    Dec 23, 2014
    Messages:
    1,105
    Location:
    South Florida
    Full Name:
    Greg S
    I have one just bought on eBay. It's pretty good
     
  16. Keith Jecks

    Keith Jecks Karting

    Joined:
    Dec 31, 2005
    Messages:
    60
    Is it complete? where did you get it and for how much? I bought one that wasn't complete (and to be fair the seller refunded all my money)
     
  17. 1PoorPlt

    1PoorPlt Karting

    Joined:
    Nov 2, 2011
    Messages:
    62
    Location:
    Houston
    Full Name:
    Kevin
    Ebay $15.00
     
  18. SCKOMS

    SCKOMS F1 Rookie Silver Subscribed

    Joined:
    Oct 21, 2011
    Messages:
    3,903
    Location:
    Lake County, IL
    Full Name:
    Spiro
    Some of these eBay manuals just copy what is on Ferraridatabase onto a CD and then sell it to you.
     
  19. gsworld2014

    gsworld2014 Formula 3

    Joined:
    Dec 23, 2014
    Messages:
    1,105
    Location:
    South Florida
    Full Name:
    Greg S
    The one I bought is pretty good. I think it is complete. It's several thousand pages.
     

Share This Page