Looking for a small machine shop | FerrariChat
Buy

Looking for a small machine shop

Discussion in '308/328' started by akimmel, Jul 2, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. akimmel

    akimmel Karting

    Aug 13, 2009
    189
    Dallas, TX
    Full Name:
    Art Kimmel
    #1 akimmel, Jul 2, 2015
    Does anyone know of a good machine shop that will do a small one-off job? I have a design for some bolt-to-the floor driver seat brackets that I want made. I am finding that the on-line shops either don't read their email or don't want to quote such a small job. I have the data in many 2-D and 3-D formats. It's not rocket science as it starts with 1.5" steel angle and requires some cutting, drilling, and one metric tapped hole.
    Thanks for any help on this.
    Art
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,667
    South East
    Full Name:
    Jimmie
    #2 greyboxer, Jul 2, 2015
    Is this for standard seats or racing ? Side mount racing seats can use standard existing Sparco type brackets to mount to the floor on a 308/328 and I believe there is a standard base-mount type too by OMP

    At a guess the machine shops are worried about product liability issues
     
  3. akimmel

    akimmel Karting

    Aug 13, 2009
    189
    Dallas, TX
    Full Name:
    Art Kimmel
    #3 akimmel, Jul 2, 2015
    It's for the stock seat due to my height and I don't tell them what it's for. Thanks for the response!
     
  4. rkljr

    rkljr Formula Junior

    May 16, 2011
    723
    South of Boston, MA
    Full Name:
    Richard
    #4 rkljr, Jul 2, 2015
    Steel or aluminum?
     
  5. i-velocita

    i-velocita F1 Rookie
    BANNED

    Sep 9, 2006
    2,520
    Colorado
    Full Name:
    James
    #5 i-velocita, Jul 3, 2015
    Any chance you can post the drawings? I'm also tall and would love to see what solution you developed. Thanks...Jim
     
  6. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    11,231
    CT
    Full Name:
    John Kreskovsky
    #6 johnk..., Jul 3, 2015
    Art,

    Try something old school. Look in a phone book, yellow pages. Best source for small local shops even in this internet age.
     
  7. Brian Harper

    Brian Harper F1 Rookie
    Owner Silver Subscribed

    Feb 17, 2006
    4,078
    San Jose area
    Full Name:
    Brian Harper
    #7 Brian Harper, Jul 3, 2015
    Instead of a machine shop maybe you need to look for a welding/fabrication shop. Also there will probably be a race car prep shop somewhere near you and that would be a good bet for someone who has the metal fabrication skills you seek.
     
  8. akimmel

    akimmel Karting

    Aug 13, 2009
    189
    Dallas, TX
    Full Name:
    Art Kimmel
    #8 akimmel, Jul 3, 2015
    It's made from available 1.5" x 1.5" x 0.188" steel angle
    It requires a threaded hole which is the main reason that I will not consider aluminum.
     
  9. akimmel

    akimmel Karting

    Aug 13, 2009
    189
    Dallas, TX
    Full Name:
    Art Kimmel
    #9 akimmel, Jul 3, 2015
    I will gladly post once it works. It will make an odd paper weight as Verell would say :)
     
  10. i-velocita

    i-velocita F1 Rookie
    BANNED

    Sep 9, 2006
    2,520
    Colorado
    Full Name:
    James
    #10 i-velocita, Jul 3, 2015
    Super!
     
  11. Brian A

    Brian A F1 Rookie

    Dec 21, 2012
    3,149
    SanFrancisco BayArea
    Full Name:
    1983 US 308 GTS QV
    #11 Brian A, Jul 3, 2015
    DATA?!?!!! I think most shops prefer a pencil sketch on a brown paper grocery bag. :)
     
  12. dinogt4guy

    dinogt4guy F1 Rookie

    Oct 31, 2004
    3,411
    Hewitt, Tx.
    Full Name:
    Kurtis Fordice
    #12 dinogt4guy, Jul 3, 2015
    I could make them.
     
  13. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #13 Verell, Jul 12, 2015
    Send me the CAD drawings.

    I can't promise to get to them before mid to late August due to current work queue, annua Ferrari BBQ, & vacation.
     

Share This Page