FABSPEED MOTORSPORT | Ferrari 360 Sport Headers

Hello Guys!


I wanted to inform all of our 360 owners that we have our next batch of 360 Sport Headers coming out of production here @ Fabspeed. While some are already spoken for, we still have a number of exhausts that will be in-stock and ready to ship out of here over the next few weeks.


Fabspeed's Sport Headers for the 360 offer significant performance increases by adding 16whp and 10wtq and saving 15 lbs. versus the bulky, more restrictive, factory headers. Below is a comparison of the OEM Catalytic Converters vs. Fabspeed's direct replacement/upgrade for the failure-prone factory headers.


Please feel free to call, DM, or email me ([email protected]) anytime with any questions you may have about getting our lighter, higher flowing, and more durable headers on your 360!



Thanks again,



-Travis
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

1. Price (including shipping)?

2. (Most importantly) Will they trigger CEL?

Thanks

 

Looks very smart !

 

Re: 2. Mine did on an 03 /w oem cats with no o2 sensor mods.

 

Fabspeed,

I have your headers, blankets, heat shields, gaskets and bolt set, and hyper flow cats awaiting install on my 360 spider

Would you recommend the "Universal 02 Spacers" with this set up?

 

Regarding the: Fabspeed High Performance Header Blankets.
I currently have fabspeed headers with the 2000 degree black coating installed. When I thermally scan the headers with the motor hot and running I get a reading of 750 degrees F.
My question....have you scanned your header blankets on a hot and running f car and what are the readings?
( I checked your website but there are no specs listed there for the fabspeed blankets)

Thanks

 

I always recommend them just to be safe so you don't have to get dirty again putting them in later incase they happen to trigger.

 

They retail at $2995 w/ about $60 shipping, depending on where you are located. FChat members get a discount, if you want to PM me or email me I can give you a quote.

As for the CEL, there is always a chance it will trigger. I always recommend running o2 spacers to help keep the occurrence minimal, if at all.


Thanks.

 

I will talk to my R&D department and PM you. Any issues, or are you just curious to see if we received similar temp readings?

 

Thanks Mel!

 

I am considering installing the blankets.
Thank You.

 

I'm a sample of one, but I just don't understand how the headers wont trigger a CEL. The way the o2 sensors are oriented stock seems to primarily monitor the readings pre & post the pre-cat in the US 00-04 manifold, essentially ignoring the the bulk of the main cat by placement. I'd be more surprised if sport cats triggered a light. For me, I never installed the spacers since they required removal of the cats to put them on. Instead, the big daddies were a quick easy install fix for me.

 

We are currently pulling our 360 w/ our headers & blankets installed outside now to warm up to temperature. We will then scan it and I will let you know our results shortly. One other big thing we designed these blankets for (other than keeping temperatures down) is to keep the noise of the actual headers themselves down. When installing any after market header you'll always notice more resonance coming off of them, and we noticed when installing the blankets they keep a lot of the noise IN the pipe - helping reduce some cabin noise as well.

 

Okay - so quick note. After we let our 360 warm up for about 10-15 minutes, my scan of the headers themselves were 575 degrees. When we scanned the blankets, they read 370 degrees. So there is definitely a couple hundred degrees difference between header to blanket, as well as the sound deadening difference like I had explained previously.

 

I have a couple sets of 360 Sport Headers left in stock ready to ship, as well as one set that is already coated Ceramic Black - so no extra wait while they get coated!

Don't hesitate to call/message me to work out a deal, I am your guy!
Image Unavailable, Please Login

 

Two sets of Sport Headers left on the shelf, let's make a deal and get a set onto your 360! Feel free to contact me with any questions or concerns, that's why I am here!

 

Getting ready to start a new production run on our Sport Headers! Don't hesitate to comment or PM with any questions you may have in regards to modifying your 360 - I am your guy!

Ferrari 360 Performance Products

 

Will these get spotted in a calif check?

 

I realize this is for the 360 but for what it's worth, I just put a set of Fabspeed headers and the blankets on my '07 430 (everything else stock). Love the sound! Not as loud as I thought it would be despite some other comments made on this forum. Maybe I just psyched myself into thinking worse case based on those comments and was pleasantly surprised when I fired it up. Anyways, it is throwing CEL codes. I have the couplers so that will be the next add-on. Otherwise, I love the setup! As to the heat, I've got an IR so I'll measure it next time.
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Nice install! Keep us in the loop on your CEL situation.

 

Just had another batch of Sport Headers coming off the fabrication list. Contact me today to allocate a set for your 360 before they fly off the shelf again!

 

Brett,

Sorry for the delay. These will be spotted if they look hard enough. Aftermarket brands don't carry the CARB certification stamp on them, so that will give you trouble unless you have a mod-friendly shop.

 

Ride along with our friend, Steve, as he cruises in his 360!

 

pls confirm if these products are 100% made in the USA or imported from Taiwan/China as all the import stats show ?

 

and meanwhile let's wait for some very evasive answers