TR front end ilignment | FerrariChat
Buy

TR front end ilignment

Discussion in 'Boxers/TR/M' started by ria, Aug 2, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ria

    ria Formula Junior

    Nov 2, 2003
    732
    ohio
    Full Name:
    phill
    #1 ria, Aug 2, 2015
    any one here did a front end ilignment on there TR ? what are the no for it? and what tool was used? i change uper/lower ball joints / tie rod ends 86 TR thanks.
     
  2. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    9,548
    southwest Germany, France ( Alsace ) and Thailand
    Full Name:
    romano schwabel
    #2 turbo-joe, Aug 2, 2015
    please have a look in the WSM
     
  3. ria

    ria Formula Junior

    Nov 2, 2003
    732
    ohio
    Full Name:
    phill
    #3 ria, Aug 3, 2015
    Did you do a alignment on your car what tool did you use?
     
  4. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    9,548
    southwest Germany, France ( Alsace ) and Thailand
    Full Name:
    romano schwabel
    #4 turbo-joe, Aug 3, 2015
    tool for measuring or for adjusting?
     
  5. Total Recall

    Total Recall Formula Junior

    Aug 21, 2014
    324
    East Yorkshire, UK.
    Full Name:
    Dominic Bradley
    #5 Total Recall, Aug 3, 2015
    Hi,

    The owner`s manual for my `86 shows:


    (front end)

    Camber 0 DEG +/- 0 Deg 15 mins

    Toe In 0.5 mm +/- 1 mm (0.02 inches +/- 0.04 inches)

    Caster 5 DEG 30 mins

    (If I`ve understood the symbols right lol).

    That`s according to the standard euro owner`s manual, not sure if there`s any difference for the US ?


    Dom.
     
  6. ria

    ria Formula Junior

    Nov 2, 2003
    732
    ohio
    Full Name:
    phill
    #6 ria, Aug 3, 2015
    i do not have the US manual if any one know the US no please post thanks.
     
  7. ria

    ria Formula Junior

    Nov 2, 2003
    732
    ohio
    Full Name:
    phill
    #7 ria, Aug 3, 2015
    measuring
     
  8. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    9,548
    southwest Germany, France ( Alsace ) and Thailand
    Full Name:
    romano schwabel
    #8 turbo-joe, Aug 3, 2015
    I use here an old bosch alignment system, with mirrors and projectors.
    there are much more better and newer systems on the market, but if something fails it costs always a lot of money because of the electronic to fix it. and the mirror system as long as no mirror fall down you never have any problems.
     
  9. ria

    ria Formula Junior

    Nov 2, 2003
    732
    ohio
    Full Name:
    phill
    #9 ria, Aug 4, 2015
    Do you have a model no ? it sounds good joe thanks.
     
  10. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    9,548
    southwest Germany, France ( Alsace ) and Thailand
    Full Name:
    romano schwabel
    #10 turbo-joe, Aug 4, 2015
  11. ria

    ria Formula Junior

    Nov 2, 2003
    732
    ohio
    Full Name:
    phill
    #11 ria, Aug 4, 2015

Share This Page