Shared Ferrari Platforms | FerrariChat

Shared Ferrari Platforms

Discussion in 'Ferrari Discussion (not model specific)' started by Napolis, Aug 25, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Napolis

    Napolis Three Time F1 World Champ Honorary Owner

    Joined:
    Oct 23, 2002
    Messages:
    32,118
    Full Name:
    Jim Glickenhaus
  2. italiafan

    italiafan F1 World Champ Silver Subscribed

    Joined:
    Jul 19, 2006
    Messages:
    16,121
    Full Name:
    Stickbones Swagglesmith
    Thankfully my F12 should be here in days.....
     
  3. NeuroBeaker

    NeuroBeaker Advising Moderator Moderator

    Joined:
    Oct 1, 2008
    Messages:
    40,038
    Location:
    Huntsville, AL., USA
    Full Name:
    Andrew
    This sounds like the death of passion.

    All the best,
    Andrew.
     
  4. Super_Dave

    Super_Dave Formula Junior

    Joined:
    Oct 6, 2014
    Messages:
    710
    Location:
    USA
    Full Name:
    Dave
    No surprise here.

    I like the reasoning for aluminum. Margins.
     
  5. NürScud

    NürScud F1 Veteran

    Joined:
    Nov 3, 2012
    Messages:
    7,308
    From bad to worse..

    Chryslerised..
     
  6. Zaius

    Zaius Formula Junior

    Joined:
    May 8, 2014
    Messages:
    863
    "Ferrari is now American, which represents the end of an era." - Montezemolo
     
  7. willrace

    willrace Three Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Oct 21, 2006
    Messages:
    35,053
    Location:
    North Tay-has
    Full Name:
    Kurt
    Heading even faster towards "Ferraris are jewelry for poseurs":
    "What body style did you choose to put on your Fe-RAAARR-ri?

    Ugh.
     
  8. JPSIII

    JPSIII Formula Junior

    Joined:
    Oct 18, 2010
    Messages:
    261
    Location:
    Tulsa, Oklahoma
    Full Name:
    Phillip Sartin
    Easily some of the worst news I've heard in a while
     
  9. Rosso328

    Rosso328 F1 Veteran Owner Rossa Subscribed

    Joined:
    Dec 11, 2006
    Messages:
    7,345
    Location:
    Central FL
    Full Name:
    Paul
    Yep. I've said it before, and I'll say it again. The whole world has been going to hell in a hand basket ever since David Lee Roth left Van Halen.
     
  10. Nospinzone

    Nospinzone F1 Veteran

    Joined:
    Jul 1, 2013
    Messages:
    7,790
    Location:
    Weston, MA
    Full Name:
    Paul
    Maybe, maybe not. I wouldn't get worked up over it just yet. It wouldn't be the first time Automobile got it wrong.;)
     
  11. au-yt

    au-yt F1 Veteran

    Joined:
    Aug 13, 2006
    Messages:
    5,838
    Location:
    Burradoo... Actually
    Full Name:
    Graeme
    +1 on the Aluminum .
    Carbon Fiber is great product BUT no one and I mean military aviation, know its fatigue life. I went to a presentation on this, there is as specialist group within the a world wide Military group working on the problem but its finding will not be made to the commercial world..

    Carbon Fiber if it catches fire its treated the same as asbestos....

    Next time you are in the ALFA dealers ask them how they treat the damage to the tub. They don't ALFA Italy make the determination at this point in time.

    I also believe that Ferrari has been made stand on its own and Sergio Marchionne has a good track record of turning a profit.

    Third thing this will also ensure the Classics retain their value hand made cars can be hand repaired.
     
  12. cloverleaf

    cloverleaf Karting

    Joined:
    Jun 16, 2013
    Messages:
    92
    The parts sharing potential between a mid-engined sports car and a front-engined V12 2+2 must be huge...
     
  13. reddog

    reddog Rookie

    Joined:
    Aug 5, 2007
    Messages:
    39
    The result all depends on how it is implemented. Could result in better developed, more robust vehicles with more exciting stuff, or it could result in junk. But it's not an American company, it's Sergio's company and he works for the Agnellis.
    And au-yt is right about carbon fiber. Look at the Porsche Carrera GT, a two seat carbon fiber car that weighs over 3,000 pounds, primarily because they had to be very conservative with the lack of knowledge on fatigue and aging.
    In my opinion, a V-12 and gated shifter are far more important than aluminum versus carbon fiber :)
     
  14. tbakowsky

    tbakowsky F1 World Champ Consultant Professional Ferrari Technician

    Joined:
    Sep 18, 2002
    Messages:
    19,966
    Location:
    The Cold North
    Full Name:
    Tom
    This will result in cookie cutter cars with an expensive name. Ferrari is now a fashion accessory. Not an enthusiasts car. Not that it didn't start with the 360.
     
  15. BoxerCrazy

    BoxerCrazy Formula Junior

    Joined:
    Nov 7, 2002
    Messages:
    355
    Location:
    Charleston WV
    Full Name:
    Douglas A Hunt
    ^^^there should be a like button for this^^^
     
  16. sidtx

    sidtx F1 Rookie Owner

    Joined:
    Feb 9, 2014
    Messages:
    4,454
    Location:
    Frisco, Tx
    Full Name:
    Sid

    It's been proven that the world has gone downhill ever since The Beatles broke up!

    All music since then has been mostly plagiarized crap.


    sid


    P.S The video at the bottom of the Lego guy building a Lego Ferrari was very cool.
     
    Last edited: Aug 27, 2015
  17. Ferrari 360 CS

    Ferrari 360 CS F1 Veteran

    Joined:
    Dec 4, 2004
    Messages:
    6,890
    Location:
    Cape Town,SA
    Full Name:
    Jacques
    Not so sure, time will tell but the article seems to be high on speculation and fairly low on perceived fact.
     
  18. Todd308TR

    Todd308TR F1 World Champ

    Joined:
    Nov 25, 2010
    Messages:
    11,074
    Location:
    LA
    Full Name:
    Todd
    Do people who buy new Ferraris care?
     
  19. 330i

    330i Formula Junior

    Joined:
    Aug 7, 2006
    Messages:
    316
    Isn't this what Lambo and Macca do?
     
  20. markmoon

    markmoon Formula Junior

    Joined:
    Sep 5, 2010
    Messages:
    682
    Location:
    Jacksonville, FL
    Full Name:
    Mark
  21. SVCalifornia

    SVCalifornia F1 Rookie Rossa Subscribed

    Joined:
    Mar 28, 2011
    Messages:
    2,571
    Location:
    Silicon Valley
    Full Name:
    Keith
    Report of a report... Lame journalism. Concept is lame too. Too many compromises to make a design that can handle front and mid engine designs. Aston makes one platform that stretches from vantage up to vanquish. All front engine designs.

    Could see them formalizing platforms, eg f12 and ff for front perhaps. 488 and Dino for mid engine. SUV and pickup. 8^)

    After that, sound like all speculation. And Ferrari has a lot of carbon fiber experience now. So I think they will commit to more not less and this is just FUD...

    SV
     
  22. F456 V12

    F456 V12 F1 Veteran Silver Subscribed

    Joined:
    Mar 13, 2004
    Messages:
    5,287
    Location:
    Coto de Caza
    Full Name:
    Christian
    I beg to differ and would go as far to say, hogwash. Go tell that to the pilots of the 787, F22 F35, every Mclaren built car, every F1 team, every fabricator, etc. CF is superior to aluminum in every way, except cost.

    https://www.youtube.com/watch?v=hjErH4_1fks

    MB
     
  23. TheMayor

    TheMayor Ten Time F1 World Champ Rossa Subscribed

    Joined:
    Feb 11, 2008
    Messages:
    106,249
    Location:
    Vegas baby
  24. TheMayor

    TheMayor Ten Time F1 World Champ Rossa Subscribed

    Joined:
    Feb 11, 2008
    Messages:
    106,249
    Location:
    Vegas baby
    Does that make it a good idea?
     
  25. NürScud

    NürScud F1 Veteran

    Joined:
    Nov 3, 2012
    Messages:
    7,308
    For that reason and only...somebody has to stop him and do it fast. If he do that, Ferrari will loose not only the credibility but maybe a lot of future buyers..

    Tough times i know but some things has to stay as it is.
     

Share This Page