Source for thick Scotchguard film? | FerrariChat
Buy

Source for thick Scotchguard film?

Discussion in 'Technical Q&A' started by Steve, Sep 3, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Steve

    Steve Formula Junior

    Nov 1, 2003
    901
    Seattle, WA
    Full Name:
    Steve Jenkins
    #1 Steve, Sep 3, 2015
    Since foglamps for the 512 TR are so expensive, I'd like to put some of the the THICK Scotchguard film on there. Any good sources?
     
  2. Jeff328

    Jeff328 Formula 3

    Sep 5, 2006
    2,293
    WI
    #2 Jeff328, Sep 3, 2015
  3. dgt

    dgt Formula 3
    Owner Silver Subscribed

    Jan 14, 2011
    1,292
    Northeast, USA & Oz
    Full Name:
    Andrew
    #3 dgt, Sep 3, 2015
    After searching I found some headlight protectors on ebay made from it. I cut and fitted them but they just fell off, even after applying them with heat.
    They are just a little too thick and inflexible to stick to the curve of the lens.
    Maybe there is a thinner version, these were about 3mm+ thick from memory.
    Sorry, not much help but I would like to have a solution as I'm with you on the motivation....
    Andrew
     
  4. dgt

    dgt Formula 3
    Owner Silver Subscribed

    Jan 14, 2011
    1,292
    Northeast, USA & Oz
    Full Name:
    Andrew
    #4 dgt, Sep 3, 2015
  5. Jeff328

    Jeff328 Formula 3

    Sep 5, 2006
    2,293
    WI
    #5 Jeff328, Sep 4, 2015
    512 TR driving lights are essentially flat, correct? Just like the ones on a 328 except maybe a little larger?

    I just bought a sheet of film from Lamin-X and cut it to the size needed to cover the lens, once fitted and trimmed it is invisible even though it is quite thick.
     
  6. Steve

    Steve Formula Junior

    Nov 1, 2003
    901
    Seattle, WA
    Full Name:
    Steve Jenkins
    #6 Steve, Sep 4, 2015
  7. Steve

    Steve Formula Junior

    Nov 1, 2003
    901
    Seattle, WA
    Full Name:
    Steve Jenkins
    #7 Steve, Sep 4, 2015
    I also think their 8 mil stuff might also work just fine.

    By searching for "8 mil film" and "12 mil film" on Amazon, there are plenty of options for thickness and width.

    And it appears 3M doesn't sell their stuff direct, which is too bad.
     
  8. Steve

    Steve Formula Junior

    Nov 1, 2003
    901
    Seattle, WA
    Full Name:
    Steve Jenkins
    #8 Steve, Sep 4, 2015
    Found the actual 3M brand on eBay, in 14 mil, shipped from the US, for a decent price. I think that's the way I'm gonna go. :)
     
  9. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,055
    USA
    #9 f355spider, Sep 4, 2015
    Steve, don't forget to do your 328GTS too. I did mine with sheets of film I bought from Griot's...but I am sure there are less expensive sources... ;)
     
  10. Steve

    Steve Formula Junior

    Nov 1, 2003
    901
    Seattle, WA
    Full Name:
    Steve Jenkins
    #10 Steve, Sep 5, 2015
    I'm doing them ALL, Dave. These lamp assemblies are getting ridiculous! :)
     

Share This Page