Check out the wall of stacked salvage 328/308

Just looking through some parts on ebay and came across the add from T. Rutlands. It is for a 328 GTS body, but what really caught my eye was in the background. Kinda cool to see where they pull these parts from.
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Sights like this really make me wonder how many of these cars ACTUALLY still exist!

 

Plenty of spares for the rest of us! Where is this?

Looks like a black Boxer is hanging up there as well!

 

t. rutlands in georgia

 

I certainly would like to know-


Tom

 

And some people can't seem to understand why the prices are rising for 3X8's, especially condition 1 cars.

 

Can we have a moment of silence for the fallen, please?

 

Good point, I guess that we are being a little insensitive aren't we.

 

I know the car well. Very sad story that one.

Low mile perfect car. Caught fire.


That's what happens when people use that braided fuel hose with modern gas.

 

What is the issue with a braided fuel line?

Reason I'm asking is because I just brought a car home with one of those, I think. If I need to get it off, it's coming off this weekend.

 

Here they are. Fabric covered. Were you referring to something different such as a metal braided hose?
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Plenty of them exist, Just like plenty of them were destroyed.

You will never ever really know.

 

From the outside, braided lines tend to hide leaks that would otherwise likely be visable.

On the inside, many hoses claim to be E10 or even E15 compliant but a few folks here have proven they are, under real world conditions, not compliant at all.

 

I just re-did the hose from the fuel pump to the carbs, and all across the 4 carbs with this type of hose. I hope JEGS didn't lie to me.

JEGS Performance Products 111910, JEGS Pro-Flo Extreme Braided Hose | JEGS Performance Products

 

That's good stuff but the crap coming out of Germany and Italy is a conflagration waiting to happen.

 

For rehabilitation of german stuff I allow myself to state, that the Volkswagen FPM/ECO fuel lines (actually a Conti product) are the best stuff I have ever got for my cars. Of course besides the orange special sizes from Dave Helms (SRI), which I have for the cross-over pipe and filler neck.
What german crappy stuff do you mean exactly?


Best Regards
Martin

 

You don't have our gas so your experience has no relevance.

The Conti turns cars into death traps. It is pretty average at best even for real gasoline.

 

Great to see an ethanol tolerant hose.

Can this stuff be used as standard unterminated and hose-clamped low pressure 3x8 fuel lines or do does it require fancy line terminators?

 

When I replace those fuel lines every five to six years, they still look and feel as new. And they state, that they are E85 tested. FPM means, that the inner liner is made from Viton, while other manufacturers just underline this material as the best ethanol resistant stuff. I had them in my last fuel injected (3 bar system pressure) Daily driver for ten years without problems or signs of deterioration. Not even on that single line, which ran 2 inches near the exhaust header.
I think Conti maybe supplies different kinds of fuel hoses. I'm talking about the FPM/ECO stuff, which they introduced for OEM stuff for the SLR-McLaren and later for OEM-VW. So I sleep well
What was really bad, was some Gates fuel hose, I used on my wife's little VW. It showed cracks on the outside just one year after installation. So I pass the ball back. Crap from the US
What's wrong with your gasoline?

Best Regards
Martin

 

I used as many of the stock hose clamps as I could. You don't need the fancy hose terminations. Just make sure you have a good hose cutter. I bought one of those from JEGS too, just so I would get nice cuts.

The JEGS hose is pricey, but an engine fire would be worse. I've worked with Viton in my real job. It's pretty tough stuff.

 

Lots more salvaging going on at Eurospares: https://www.youtube.com/watch?v=HhHkWCOYvbk

 

E10-E15 is 'normal.'

We smart Euros KILLED anything above E5 almost dead a couple of years ago.

My local station sells 1 E10 liter to near 50 E5 liters per X.

Even the very cost conscience kids like my dumbassed college kid son have wised up.

Euros stopped buying lethal mouse piss. Americans have not.

 

When I took out the headers a few years back I found there was one crossover pipe and two vent tubes between two fuel tanks. The only ground points were the filler pipe where it was bolted to the body and the ground wire for the fuel level sensor. So when you are filling the drivers side tank the fuel is moving to the passenger tank via the crossover pipe. This will create static electricity with now were to go. In fact the crossover pipe has a rubber cover around were the mounting strap goes. Add in 30 year old leaky venting hoses and you have a fuel source. When I put everything back in I made sure all the tanks, pipes and tubes had ground straps on them.

 

Ok so a stupid question before paranoia sets in ......
Which cars have the faulty hoses ?
Prior to some year or model ?

 

E10 pretty routinely measures at 20%.

God knows what E15 really is.