carbon fiber wrap | FerrariChat
Buy

carbon fiber wrap

Discussion in '348/355' started by 2mmuch, Sep 19, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #1 2mmuch, Sep 19, 2015
    Last edited by a moderator: Sep 7, 2017
    As I had to remove my steering wheel shroud to locate and fix an issue I thought it would be a good idea to clean and remove all the sticky stuff on the shroud. I used Oxi Clean like I read in other posts and it did the trick. They came out smooth as glass. I was going to clear coat them but I thought since I had some carbon fiber wrap laying around I would give it a try. Wow, they came out looking fantastic. Couldn't be happier. Can wait to put them back in the car.
    Image Unavailable, Please Login
     
  2. Eric C

    Eric C F1 World Champ
    Silver Subscribed

    Mar 20, 2009
    11,054
    St. Louis, MO
    Full Name:
    Eric
    #2 Eric C, Sep 19, 2015
    What brand wrap did you use? Got a link? That looks pretty glossy, not like most I've seen.
     
  3. tres55

    tres55 F1 Rookie
    Rossa Subscribed

    Sep 18, 2012
    3,572
    Canada
    #3 tres55, Sep 19, 2015
    That looks great.

    As Eric said, the 3M Carbon Fiber wrap I've seen and used is more 3D and matte looking. That looks very realistic.
     
  4. madturk

    madturk Formula 3
    BANNED

    Nov 2, 2003
    1,508
    Williston, ND
    Full Name:
    Seyhan Kilincci
    #4 madturk, Sep 19, 2015
    Looks superb. Great work
     
  5. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #5 2mmuch, Sep 19, 2015
    Last edited: Sep 19, 2015
    I used the gloss 4D carbon fiber wrap on eBay. I thick I'm going to try it on the center counsel next. I bought the stuff to wrap my Baby Grand Piano during the winter. Who new it would come out that good. Your right most of the carbon wraps I have seen also looked flat.
     
  6. Stentboy

    Stentboy F1 Rookie
    Owner Rossa Subscribed

    May 8, 2008
    2,810
    Texas
    Full Name:
    Ron
    #6 Stentboy, Sep 19, 2015
    I'm not a fan of mods but that looks good.
     
  7. Eric C

    Eric C F1 World Champ
    Silver Subscribed

    Mar 20, 2009
    11,054
    St. Louis, MO
    Full Name:
    Eric
    #7 Eric C, Sep 19, 2015
    Tried PM'ing you, but your box is full.
     
  8. nismodrifter

    nismodrifter Formula Junior

    Jun 11, 2008
    544
    YYC/YVR
    Full Name:
    Navdeep
    #8 nismodrifter, Sep 19, 2015
    Looks great!
     
  9. Stentboy

    Stentboy F1 Rookie
    Owner Rossa Subscribed

    May 8, 2008
    2,810
    Texas
    Full Name:
    Ron
    #9 Stentboy, Sep 19, 2015
    Email me at [email protected]
     
  10. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    28,989
    socal
    #10 fatbillybob, Sep 19, 2015
    Looks sharp! Con cpmplex curves people have been doing pretty well with the water decal carbon fiber too.
     
  11. Eric C

    Eric C F1 World Champ
    Silver Subscribed

    Mar 20, 2009
    11,054
    St. Louis, MO
    Full Name:
    Eric
    #11 Eric C, Sep 19, 2015
  12. 97 Spider

    97 Spider Formula 3

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    #12 97 Spider, Sep 19, 2015
    I used this same stuff to do my engine bay panels and my interior mirror triangles. It looked great but kept bubbling up. I pulled it off and used 3m adhesion promoter for wraps and redid them but it still didn't hold. I ended up just getting real CF. I hope it stays for you. The stuff is low cost and really looks good.
     
  13. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #13 2mmuch, Sep 19, 2015
    Last edited by a moderator: Sep 7, 2017
    I hope it holds also, it really looks good. I did my targa roof 2 weeks ago and it has been on in the heat and it still looks as good as the day I did it. My roof was painted to match the car, I just wanted something different.
    Image Unavailable, Please Login
     
  14. Drock28

    Drock28 Formula 3

    Jan 13, 2013
    1,430
    Montreal
    Full Name:
    Tony
    #14 Drock28, Sep 19, 2015
    I'd see how the engine bay panels would bubble under the heat.
    but did the mirror triangles also bubble?
    I don't see why they would?
     
  15. Gene G

    Gene G Karting

    Jul 13, 2015
    68
    Saint Johns Fl.
    Full Name:
    Gene
    #15 Gene G, Sep 20, 2015
    Very nice !
     
  16. SoCal1

    SoCal1 F1 Veteran
    Owner Silver Subscribed

    Jun 14, 2011
    8,630
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
    #16 SoCal1, Sep 20, 2015
    I like the wrap quite a bit

    Wonder why it bubbled maybe some solvent pop from under

    Post a link to what you used please?

    I know there is some real high quality stuff out there
     
  17. SoCal1

    SoCal1 F1 Veteran
    Owner Silver Subscribed

    Jun 14, 2011
    8,630
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
    #17 SoCal1, Sep 20, 2015
    Thats amazing stuff, they do bike gas tanks and bodywork with it
     
  18. John_K_348

    John_K_348 F1 Rookie

    Sep 20, 2013
    2,753
    Boston, MA
    Full Name:
    John E. Kenney
    #18 John_K_348, Sep 21, 2015
    Looks good. I am thinking of making a splitter and wrapping it with this.
     
  19. Eric C

    Eric C F1 World Champ
    Silver Subscribed

    Mar 20, 2009
    11,054
    St. Louis, MO
    Full Name:
    Eric
    #19 Eric C, Sep 21, 2015
    What brand wrap did you use?
     
  20. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #20 2mmuch, Sep 21, 2015
    not sure what the brand it is. I bought it off e-bay. High Gloss 4D carbon fiber wrap.
     
  21. John_K_348

    John_K_348 F1 Rookie

    Sep 20, 2013
    2,753
    Boston, MA
    Full Name:
    John E. Kenney
    #21 John_K_348, Sep 21, 2015
    Starting splitter now. Making a template. Thinking 1.25 inch cord width.
     
  22. John_K_348

    John_K_348 F1 Rookie

    Sep 20, 2013
    2,753
    Boston, MA
    Full Name:
    John E. Kenney
    #22 John_K_348, Sep 22, 2015
    Template is done with a nice blending curve to the bumper edges. Used my compass set but no French curve. Didn't need it luckily. I'll get materials on Wednesday. Going to try a laminate of two layers of vinyl board, silicon adhesive, and then the wrap with clear coat. We'll see. May staple it too if I can make them recessed or flush. Then use 3M heavy duty tape with no drilling.
     
  23. Shootfighter65

    Shootfighter65 Formula 3

    May 13, 2014
    1,372
    Charleston SC
    Full Name:
    Randy..alluneedtokno
    #23 Shootfighter65, Sep 22, 2015
    Looks great
     

Share This Page