Affordable, usable generic "Ferrari" tool roll | FerrariChat

Affordable, usable generic "Ferrari" tool roll

Discussion in 'Ad Archives' started by Alden, Aug 29, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,601
    Central Florida
    #1 Alden, Aug 29, 2015
    Last edited by a moderator: Sep 7, 2017
    These may not get you any points at Cavallino, but it might get a smile out of the judge or save your butt on the side of the road.

    I made up one of these for myself because I didn't want to carry my very valuable tool roll with me in the car but still wanted something that looked the part and had some good usable tools.

    My neighbor asked me to make one up for his car too so I thought maybe some of you might like it too.

    Just add your tow eye and you are good to go for most roadside emergency repairs.

    Kit is available in either black or red tool roll. The black one is a bit larger and has buckle closures, the red one has elastic loops on the outside to keep it together.

    Please let me know if you want red or black in your PM.

    Tool kits include:

    "Accutire" Brand Digital Tire Pressure Gauge - rated most accurate by Consumer Reports
    (4)Red handled large and small regular and phillips screwdrivers with Chromium-vanadium blades with magnetic tips.
    (9) Piece Chromium-vanadium combination wrench set, 7-17mm.
    Red "Snap-On" brand 5 led flashlight
    7 1/2" heavy duty lineman's pliers
    8" heavy duty needle nose Pliers
    35mm/1 1/2" adjustable wrench
    Red folding lockback razor knife
    T Handle 5/8"/16mm spark plug tool - fits most early to late 80's Ferraris, check to make sure it fits yours.
    Very nice heavy duty 12V circuit tester with large clamp and usable 5' lead
    (2) Microfiber towels
    (2) Universal fit neoprene gloves

    The cost for the set is $299 shipped to the CONUS and I am building these to order, delivery is expected to take two weeks.

    I will take a deposit of $150 by paypal to order and invoice you for the balance when they are ready to ship.

    Please let me know if you want the black or red tool roll or if you need a different size spark plug tool other than the 5/8"/16mm included in the kit.

    If you want both the red and black tool rolls, it will be an extra $50, total of $349.

    PM with your contact info to order and I will send you a Paypal invoice for the deposit.

    I can also put other car logos on these if you want one for your "number two" vehicle or a gift for a non F car owner.

    Thanks!
    Alden
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,601
    Central Florida
    #2 Alden, Sep 29, 2015
    Last edited by a moderator: Sep 7, 2017
    The response to my affordable, usable tool rolls/kits has been great and I want to thank everyone who has purchased one from me.

    I just made up a blue kit for a customer, I think it turned out very nice.

    The kits are available in black, red and now blue.

    The blue and red kits are a little smaller and have elastic loop retainers, the black kit is larger and has adjustable buckle closures.

    Lots of good tools included and still available for $299 shipped.

    I need two weeks lead time for delivery and take a $150 deposit with the balance due when ready to ship.
    Alden
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  3. lucky strike

    lucky strike Formula Junior

    Apr 26, 2015
    472
    Pompano Beach Fl
    Full Name:
    Steve
  4. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,601
    Central Florida
    Thanks! The response from the Ferrari community has been great! I guess our original tool rolls are museum pieces now due to the meteoric rise in prices, so we all leave them at home.

    It is nice to have a few good tools, gloves and a good flashlight in the car though.

    Thanks to everyone to has bought one and send me a PM to order!
    Alden
     
  5. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,601
    Central Florida
    Bump.
    Alden
     
  6. AP328

    AP328 Karting
    Silver Subscribed

    Aug 5, 2005
    88
    Canada
    Do you ship to Canada and if so, how much does it cost? Are the tools of US manufacture (affects duty)?
     
  7. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    8,169
    around Modena, Italy
    Full Name:
    Alberto Mantovani
    Nice!

    ciao
     
  8. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,601
    Central Florida
    I can ship to Canada, it is usually +$15-20 or so. Tools are not US manufacture, but they are some good quality tools that I have used in the past for these kits and everyone has been pleased with the them.
    Alden
     

Share This Page