Who was needing the 348 TS rear badge? | FerrariChat
Buy

Who was needing the 348 TS rear badge?

Discussion in '348/355' started by 97 Spider, Oct 5, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 97 Spider

    97 Spider Formula 3

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    #1 97 Spider, Oct 5, 2015
    Last edited by a moderator: Sep 7, 2017
    I know someone was looking for a TS badge for their 348 the other day but can't find the thread now. Didn't look too hard. If you didn't find one PM me I've got you covered if this one is good enough for you. The deck lid is on my spider project so I need a spider one not this one.
    Image Unavailable, Please Login
     
  2. ///Mike

    ///Mike F1 Veteran

    Dec 11, 2003
    6,097
    Bugtussle
    #2 ///Mike, Oct 5, 2015
    The post is in the FS&W section. Just got bumped recently so it's likely still on the first page.

    Super nice of you to think of him. :)

    Maybe you guys oughta see if the 3D printer dude would be willing to start making them if he had one to scan. Apparently they're really tough to get. You could send it to the 3D guy, who could scan it and send it to the guy in need. Just a thought...
     
  3. 97 Spider

    97 Spider Formula 3

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    #3 97 Spider, Oct 6, 2015
    Thank you. I found it a posted a reply.
     
  4. vjlax18

    vjlax18 Formula Junior
    Silver Subscribed

    May 12, 2014
    687
    Nottingham, MD
    Full Name:
    John
    #4 vjlax18, Oct 6, 2015
    I posted in the FS thread, but I also need one. I have a friend that does 3D printing if this could be scanned.
     
  5. alexjack

    alexjack Karting

    Jun 29, 2013
    67
    New England
    Full Name:
    Don
    #5 alexjack, Oct 6, 2015
    I've also been looking for one. I would be in for buying a used one or getting in on a 3D printing. Or if anyone else has one for sale please let me know. Thanks, Don.
     
  6. bayferrari

    bayferrari Karting
    Silver Subscribed

    Mar 10, 2011
    95
    Bay Area
    Full Name:
    William
    #6 bayferrari, Oct 6, 2015
    I been looking for months, please pm me and we can get the deal going.
    Thanks
     
  7. vjlax18

    vjlax18 Formula Junior
    Silver Subscribed

    May 12, 2014
    687
    Nottingham, MD
    Full Name:
    John
    #7 vjlax18, Oct 7, 2015
    Can someone take measurements of their badge for me? My guy is asking and he's going to print one for me, but I need measurements to give him. (or an actual badge to scan)
     
  8. 97 Spider

    97 Spider Formula 3

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    #8 97 Spider, Oct 7, 2015
    Ok I was looking at maybe getting these scanned and mde myself but with what all I have going on I don't think I want to take anything else on at the moment.

    Who knows exceptional person who will 3d scan and print these and make them availible to everyone at a decent price?

    I have an extra TS and TB badge I would send to get scanned then I'd need them back since the TS one is going to William / bayferrari.

    Please let me know if we can get something going.
     
  9. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #9 2mmuch, Oct 7, 2015
    I can do both, scan and print, but I live in Canada and wouldn't want them to get lost in the cross board. If you think its not an issue you can send them to me and I will send them back. Just send me a PM, and I will send you my address.

    Lou
     
  10. 97 Spider

    97 Spider Formula 3

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    #10 97 Spider, Oct 7, 2015
    I'm game. It's just if they are really this hard to find I want to make sure they get to someone who can produce them at a reasonable price for the 348 crowd. To have them availible in plastic is better then not being able to get one at all. We just need someone to send in a spider one since that's the one I am short and actually need myself.

    I may start another thread that is specific to what this one turned into to discuss the options. Thanks.
     
  11. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #11 2mmuch, Oct 7, 2015
    Last edited: Oct 7, 2015
    I also have access to CNC and Injection molding machines. Once the piece is scanned I can machine an aluminum prototype mold and make them if the 3d printing is to rough and doesn't look Ferrari quality. I can produce 1 on a 3d printer and see if it is ok and if it is what people want that is what I can sell them or later give an option for a better product. I have no problem making them at a reasonable price, for others. Also the Canadian dollar is way down so that would make it even cheeper for all.

    Just a question. Are these not available anymore. Ricambi shows them on there site for $210 and $265 both 348ts and 348tb. A little high if you ask me. Can product it for less then half.
     
  12. 97 Spider

    97 Spider Formula 3

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    #12 97 Spider, Oct 7, 2015
    I haven't actually been looking for one myself but since a put this up I have had a good half dozen people PM me wanting to buy it because they have been trying to get one forever. I was told Ricambi has emailed saying they did not have one to some but now they do show the have one. ??? That's on the TS badge maybe the TB badge is around I just thought since I had one of those too I'd throw it into the mix. With the response I'd had I don't think it would take you long at all to make any investment back.
     

Share This Page