license plate frames that fit a Euro 360 - are they available? | FerrariChat
Buy

license plate frames that fit a Euro 360 - are they available?

Discussion in '360/430' started by GordonF355, Dec 9, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. GordonF355

    GordonF355 Formula 3

    Aug 13, 2005
    1,017
    Cincinnati, Ohio
    Full Name:
    Gordon
    #1 GordonF355, Dec 9, 2015
    Last edited by a moderator: Sep 7, 2017
    I have a 2000 Euro 360 Modena. I cannot fit a license plate frame on the rear because my car does not have a cutout for the license plate like the US cars do. Mine has a continuous black trim piece below the plate. Any ideas?
    Image Unavailable, Please Login
     
  2. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,519
    Campbell, CA
    Full Name:
    John Zornes
    #2 Skidkid, Dec 9, 2015
    On an airplane right now but can take some pictures when I get home. The short version is that I put some spacers at the bottom attach points so that the plate clears the diffuser.
     
  3. GordonF355

    GordonF355 Formula 3

    Aug 13, 2005
    1,017
    Cincinnati, Ohio
    Full Name:
    Gordon
    #3 GordonF355, Dec 9, 2015
    Thanks for your reply!~ It seems like the diffuser is about an inch deep.. I would love to see some pics of how you cleared that diffuser! What kind of license plate holde did you end up getting - metal or plastic? I was just planning on ordering a black plastic one with Ferrari lettering on it. Thanks for your help!
     
  4. jackgt

    jackgt Formula Junior

    Jan 27, 2015
    574
    california
    Full Name:
    Jack
    #4 jackgt, Dec 10, 2015
    when I put a plate on mine, I thought it was a little tight, just trimed the plate a little, you would have to shim the plate quite a bit if you are stuck on a plate holder
     
  5. vrsurgeon

    vrsurgeon F1 World Champ
    Silver Subscribed

    Dec 13, 2009
    16,523
    Charleston, SC
    Full Name:
    Curt
    #5 vrsurgeon, Dec 10, 2015
  6. GordonF355

    GordonF355 Formula 3

    Aug 13, 2005
    1,017
    Cincinnati, Ohio
    Full Name:
    Gordon
    #6 GordonF355, Dec 10, 2015
  7. GordonF355

    GordonF355 Formula 3

    Aug 13, 2005
    1,017
    Cincinnati, Ohio
    Full Name:
    Gordon
    #7 GordonF355, Dec 10, 2015
    Last edited by a moderator: Sep 7, 2017
  8. Frips_Girl

    Frips_Girl Formula Junior

    Nov 29, 2007
    576
    SoCal & TO
    Full Name:
    Annetta
    #8 Frips_Girl, Dec 10, 2015
    That's interesting. I've sold a few frames for your model of car in the past and looking at your photo, I can see your problem. It could possibly be just a tight fit, but I'll look in my archive of photos and see if I can find something to send to you.

    I'd say to try with a regular frame to see how it would fit first. Your solution could either be a super careful installation due to the extreme tight fit, or a very slim frame that barely extends past the license plate.

    Let me look and see what I can find :)
     

Share This Page