Door panel removal

This is a good howto.. http://m.myferrari.page.tl/348-Door-Trim-Removal.htm

Once you get the door lock knob off if you don't mind showing a few photos of the back of the top door skin near the lock knob. Mine has come loose and rattles the assembly abd need to see whats not holding the top. Thx.

Sent from my 0PJA2 using Tapatalk

 

It's not a tough job at all so just take your time and follow the directions. One thing to be prepared for is the destruction of most of the plastic push pins that hold the lower section to the door. Don't try to source them from the local Ferrari store unless you want to be really overcharged. Probably have them at NAPA.

 

Super easy. Found some strange things behind MY door...we will not get into. but yea. 10 min to take off both

 

It would be nice to find a stack of hundreds in there to feed the beast!

Sent from my 0PJA2 using Tapatalk

 

whilst your in there have a look at the door plug connectors, plug and base usually have poor connection, rusted, green and cables split. a good clean up goes along way and fitting the electric window relay fixes the up and down window issues.

 

When I pulled my doors apart, I ordered the push pins from Ricambi as they weren't that expensive at all. I'm all about using a less expensive alternative, but in this case, the ones from Ricambi were pretty cheap.

 

We have a pdf file with pics on our site that your more then welcome to use.

Help - Sticky No More

 

thats service