Getting the 360 deck to work in a 355 | FerrariChat
Buy

Getting the 360 deck to work in a 355

Discussion in '348/355' started by Redlyne_mr2, Jan 28, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Redlyne_mr2

    Redlyne_mr2 Formula Junior

    Aug 5, 2009
    473
    Calgary, Alberta
    Full Name:
    Ryan D
    #1 Redlyne_mr2, Jan 28, 2016
    I've tried to search but I can't find the answer I'm after. I have a deck out of a 360, I've got the original tape/cd changer in my 98 355. There is no harness with my 360 deck, before I start removing dash parts it would be nice to know what's involved with this installation. Has anyone done it? Any extra harnesses needed?
     
  2. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #2 308gtsqv, Jan 28, 2016
    I just did this on my car. Your best bet is to order an new Becker radio harness. They're about $30 from Becker. You can find them on eBay.
     
  3. Redlyne_mr2

    Redlyne_mr2 Formula Junior

    Aug 5, 2009
    473
    Calgary, Alberta
    Full Name:
    Ryan D
    #3 Redlyne_mr2, Jan 28, 2016
    OK thanks.. any particular model number or is it just a matter of searching becker 360 radio harness?
     
  4. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #4 308gtsqv, Jan 29, 2016
  5. Badabing!

    Badabing! Formula Junior

    Mar 30, 2014
    731
    NYC
    #5 Badabing!, Feb 1, 2016
    This is being sold by Becker auto sound in NJ. I've used them. Call them with questions. They are very helpful.
     

Share This Page