Ignition control/MSD on 308/328/Mondial | FerrariChat

Ignition control/MSD on 308/328/Mondial

Discussion in 'Technical Q&A' started by skiride63, Feb 2, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. skiride63

    skiride63 Rookie

    Joined:
    Jan 14, 2014
    Messages:
    1
    Location:
    Singapore/Norway
    Full Name:
    Trond
    Hi. I have a Mondial qv -85 US and I am now going to put a supercharger into it. I have been in contact with Larry about the fueling so that should be ok. I am trying to do this with a small budget. One of my many thoughts was using MSD 6530 (programmable) ignition control inline my digiplexes and coils using pin #11. Question: If do so, will I be able to program my ignition, will I have a set/locked timing prior to programming? If I disconnect the vacuum hose on my digiplex, will my timing follow map curve 1 (0-70mmHg)? If so, will my timing be " locked"? My manual says: 6 deg at 1000rpm w/o vacuum and 32 deg at 5000 rpm w/o vacuum. Maybe this application can't be done and it is a waste of money? Another ways with MSD? Thanks in advance for any reply. Brgds T
     
    skiride63, Feb 2, 2016
    #1
  2. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ Owner Rossa Subscribed

    Joined:
    May 4, 2001
    Messages:
    36,448
    Location:
    Birmingham, AL
    Full Name:
    Tommy

    I think I just found your problem. It's right here:

     
    Dr Tommy Cosgrove, Feb 3, 2016
    #2
  3. Steve King

    Steve King F1 Rookie

    Joined:
    Feb 15, 2001
    Messages:
    4,367
    Location:
    NY
    Maybe a small budget is $20K.
     
    Steve King, Feb 3, 2016
    #3

Share This Page