Bosch Brass CIS Fuel Injectors | FerrariChat

Bosch Brass CIS Fuel Injectors

Discussion in 'Ad Archives' started by SeattleM5, Feb 23, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. SeattleM5

    SeattleM5 Formula 3
    Rossa Subscribed

    Jul 9, 2006
    1,259
    Kirkland, Washington
    Full Name:
    Ettore Palazzo
    #1 SeattleM5, Feb 23, 2016
    Last edited by a moderator: Sep 7, 2017
    For sale is a set of 8 Bosch CIS fuel injectors (Bosch part number 0437502047). These were purchased new and in service on my 328 for only 300 miles before I switched back to the original steel injectors. Despite being practically new, I went ahead and ultrasonically cleaned them, followed by bench testing on the KDJE P400. All 8 injectors have an opening pressure of 3.7-3.8 bar (spec is 3.8 bar new and >3.5 bar used), with normal spray pattern, and no leaks with constant pressure of 3.0 bar applied for 1 minute. These injectors fit the following models: 308 QV, 328, 400i, 512BBi, Mondial QV, and Testarossa.

    $150 for the set of 8. Shipping is free in the Continental US and I'll take care of paypal fees. For an extra $40 I'll throw in a fuel injector puller as well. If anyone wants just a puller I have a separate ad out for that but note that there are only a few of those left and at this point I don't plan on making any more (http://www.ferrarichat.com/forum/ferrari-parts-collectibles/509578-3x8-mondial-fuel-injector-puller.html)
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. SeattleM5

    SeattleM5 Formula 3
    Rossa Subscribed

    Jul 9, 2006
    1,259
    Kirkland, Washington
    Full Name:
    Ettore Palazzo
    The pullers are almost gone but I'll keep the one in the photo with this set of fuel injectors and if you purchase the injectors for $150 I'll go ahead and throw in the injector puller FOR FREE!

    Sent from my SM-G900V using Tapatalk
     
  3. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,809
    Cerritos, CA.
    Full Name:
    Mike
    Ettore, why did you went back to the original steel injectors?
     
  4. SeattleM5

    SeattleM5 Formula 3
    Rossa Subscribed

    Jul 9, 2006
    1,259
    Kirkland, Washington
    Full Name:
    Ettore Palazzo
    Mike, I'm happy to share my opinion on steel vs brass CIS injectors but I wonder if that sort of discussion would be best served in one of the model specific sections of the forum rather than in an ad (maybe the 308/328 section?). Also note that if you search the forum the merits of steel vs brass have been discussed before, and as is often the case here, was not without controversy. Let me know if you'd like me to post something separately and I'd be happy to prepare something tonight after work.

    Sent from my SM-G900V using Tapatalk
     
  5. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,809
    Cerritos, CA.
    Full Name:
    Mike
    Thank you for that Ettore. Reason I ask is because I was going to change my injectors with the brass type but my F mechanic said no so I just had my original steel injectors cleaned and reused them. My 84 QV has been running smooth all this time.
     
  6. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,604
    Central Florida
    I will take the set for my 1988 3.2 Mondial.
    Alden
     
  7. SeattleM5

    SeattleM5 Formula 3
    Rossa Subscribed

    Jul 9, 2006
    1,259
    Kirkland, Washington
    Full Name:
    Ettore Palazzo
    Sale pending

    Sent from my SM-G900V using Tapatalk
     
  8. SeattleM5

    SeattleM5 Formula 3
    Rossa Subscribed

    Jul 9, 2006
    1,259
    Kirkland, Washington
    Full Name:
    Ettore Palazzo

Share This Page