How do I remove this air scoop... | FerrariChat

How do I remove this air scoop...

Discussion in '348/355' started by lotusk, Feb 24, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. lotusk

    lotusk Formula 3

    Joined:
    Nov 3, 2003
    Messages:
    1,840
    Location:
    London UK
    I'd like to remove my left hand radiator air scoop...the plastic body piece that sits under the door...part number: 64101210

    Anyone know what's involved in removing this....i know the sill plate has to come off to reveal some screws but are there any other screws or bolts that have to be removed?

    I scraped the part going over a speed bump...want to take it to the body shop for a proper paint.
     
  2. lotusk

    lotusk Formula 3

    Joined:
    Nov 3, 2003
    Messages:
    1,840
    Location:
    London UK
    This for a 355
     
  3. Robbe

    Robbe Formula Junior Silver Subscribed

    Joined:
    Aug 22, 2013
    Messages:
    622
    Location:
    The Netherlands
    you need to undo 2 nuts inside the fender. (and of course the wheel lining to get there). One nut you can reach easily, and for the other it is best accessed when the radiator is removed first...and the studs are easily broken off because of rust...
    So not really as easy as it may seem. If not really necessary, leave it on.

    the good news is that the whole thing is glassfibre, so repair is easy.
     
  4. lotusk

    lotusk Formula 3

    Joined:
    Nov 3, 2003
    Messages:
    1,840
    Location:
    London UK
    Thanks Robbe but....

    Are you sure there are 2 nuts inside the fender?
    From photos i can only see 1 that is easy to get to with the radiator in place....cannot see another?
     
  5. Marius

    Marius Formula Junior

    Joined:
    Sep 5, 2006
    Messages:
    371
    Location:
    Germany/Belgium
    Full Name:
    Marius
    For sure 2 nuts inside the fender, no way to reach the 2nd one without undoing the radiator, I'm afraid. Then some more screws on top the part, some on the bottom and one single one which can be reached from the front wheel arch. Easy remove except the one behind the radiator....
     
  6. phrogs

    phrogs F1 Veteran Silver Subscribed

    Joined:
    Apr 13, 2004
    Messages:
    7,346
    Location:
    Kzoo Michigan
    Last edited by a moderator: Sep 7, 2017
  7. lotusk

    lotusk Formula 3

    Joined:
    Nov 3, 2003
    Messages:
    1,840
    Location:
    London UK
    Thanks guys.
    Gonna have to have it painted whilst on the car
    Cannot get to that second bolt behind the radiator.
     
  8. hjp

    hjp Formula Junior

    Joined:
    Feb 23, 2013
    Messages:
    591
    Location:
    Kansas City, Mo.
    Full Name:
    Jerry Peterson
    Lotusk,

    I have a '96 355 Spider but I believe all 355s should be the same. If you reach inside the small air opening under the doors, back about 8-10" or so inside the black fiberglass louver in the center of the outside edge is a removable rubber plug about an inch in diameter. Removing it gives access to the otherwise inaccessible nut. You should not have to remove the radiator to get to it.
     
  9. lotusk

    lotusk Formula 3

    Joined:
    Nov 3, 2003
    Messages:
    1,840
    Location:
    London UK
    Yep thanks jerry...i found the plug...but i don't fancy trying to get that nut off!

    I bet it's stuck fast!

    Gonna have the piece painted in situ

    Good to know though
     
  10. cf355

    cf355 F1 Rookie

    Joined:
    Feb 28, 2005
    Messages:
    4,208
    Full Name:
    chris
    excellent advice
     

Share This Page