348Tb engine bay connector | FerrariChat
Buy

348Tb engine bay connector

Discussion in '348/355' started by marc556, Mar 8, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. marc556

    marc556 Formula Junior
    Silver Subscribed

    Jul 15, 2007
    590
    Wiltz (Lux)
    Full Name:
    Marc Foyen
    #1 marc556, Mar 8, 2016
    Last edited by a moderator: Sep 7, 2017
    Dear all,

    I need your help as soon as possible.
    My 348 has to go to Ferrari for Ferrari Classiche certification and before I must change a connector.
    My car is in France (900 km of my home) so I don't know exactly what connector I need.

    I speak about the 9 pin connector fitted close to the rear left shock absorber.
    Could you tell me the dimension between the 4 fitting screws and the connector diameter?
    thank you so much.

    Marc
    Image Unavailable, Please Login
     
  2. bosshog8

    bosshog8 Formula Junior

    Mar 13, 2011
    448
    Pinelands NJ
    Full Name:
    Demetrius
    #2 bosshog8, Mar 8, 2016
    Dimension between the 4 fitting screws = 25mm centerline
    Connector diameter = 20mm
     
  3. marc556

    marc556 Formula Junior
    Silver Subscribed

    Jul 15, 2007
    590
    Wiltz (Lux)
    Full Name:
    Marc Foyen
    #3 marc556, Mar 8, 2016
    thank you so much.....

    do you know the diameter of the cable from the engine?
     
  4. bosshog8

    bosshog8 Formula Junior

    Mar 13, 2011
    448
    Pinelands NJ
    Full Name:
    Demetrius
    #4 bosshog8, Mar 9, 2016
    The cable from the engine is sheathed in a non-split corrugated loom material and is 11mm.
     
  5. marc556

    marc556 Formula Junior
    Silver Subscribed

    Jul 15, 2007
    590
    Wiltz (Lux)
    Full Name:
    Marc Foyen
    #5 marc556, Mar 9, 2016
    I try to find a part as close as possible to the original, but I don't find it....
    I want to use a water proof connector especialy the one fitted on the frame..

    If someone of you has the solution...it should be nice!
     
  6. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    3,288
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    #6 m.stojanovic, Mar 13, 2016
    Last edited by a moderator: Sep 7, 2017
    I just bought Amphenol 9 pin Connector MS3106F 20-16S / MS3102A 20-16P. The bad thing is that it is not original (crappy) connector. The good thing is that it is military grade and has two pins thicker than the others, one of which I will use for the high current starter solenoid wire.
    Image Unavailable, Please Login
     
  7. ///Mike

    ///Mike F1 Veteran

    Dec 11, 2003
    6,097
    Bugtussle
    #7 ///Mike, Mar 14, 2016
    Nice find, Miroljub. Thanks for the info.

    Does anyone have the pin-out for this connector? I know I've seen it here before but I'm sick of trying to find it via the search function. :(
     
  8. Wade

    Wade Three Time F1 World Champ
    Owner

    Mar 31, 2006
    32,793
    East Central, FL
    Full Name:
    Wade O.
    #8 Wade, Mar 14, 2016
    Last edited by a moderator: Sep 7, 2017
  9. ///Mike

    ///Mike F1 Veteran

    Dec 11, 2003
    6,097
    Bugtussle
    #9 ///Mike, Mar 14, 2016
    That helps. Thanks, Wade.
     
  10. marc556

    marc556 Formula Junior
    Silver Subscribed

    Jul 15, 2007
    590
    Wiltz (Lux)
    Full Name:
    Marc Foyen
    #10 marc556, Mar 21, 2016
    Very good information!
     
  11. Jh348

    Jh348 Karting

    Sep 5, 2015
    187
    Finland
    Full Name:
    Jesse Heinola
    #11 Jh348, Apr 7, 2016
    I just bought a new oe connector and pins/shells for it, its about 15eur hole lot.

    Its AMP cpc connector

    182645-1
    206705-1 (The half with a flange)

    Dont know if it helps anyone
     
    Pangea likes this.
  12. ///Mike

    ///Mike F1 Veteran

    Dec 11, 2003
    6,097
    Bugtussle
    #12 ///Mike, Apr 7, 2016
    Thank you for the info, Jesse.
     
  13. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    3,288
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    #13 m.stojanovic, Jul 13, 2016
    Last edited by a moderator: Sep 7, 2017
  14. ///Mike

    ///Mike F1 Veteran

    Dec 11, 2003
    6,097
    Bugtussle
    #14 ///Mike, Jul 13, 2016
    Good stuff. Thank you.
     
  15. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    3,288
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    #15 m.stojanovic, Jul 17, 2016
    Last edited by a moderator: Sep 7, 2017
    To further complete the info:

    - The terminal Pins & Sockets come as Tin, Zinc or Gold coated (Gold, of course, is better)
    - The shown terminal Pins/Sockets for the 9-Pin Connector are also good for the Door Harness Connector
    - The alternative (Cannon and AMP) military grade connectors are what I am installing at present; the wires are soldered to the pins/sockets (more reliable connection); the connectors are fully waterproof
    (also see the attached pdf files)
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     

Share This Page