308 Instrument Cluster and Binnacle removal

Here you go:
How can i remove the instrument nacelle?

https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Eferrarichat%2Ecom%2Fforum%2Fshowthread%2Ephp%3Ft%3D472355&share_tid=472355&share_fid=9080&share_type=t


Sent from my iPhone using Tapatalk

 

Here you go;
How can i remove the instrument nacelle?

https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Eferrarichat%2Ecom%2Fforum%2Fshowthread%2Ephp%3Ft%3D472355&share_tid=472355&share_fid=9080&share_type=t


Sent from my iPhone using Tapatalk

 

This may be a better link since the above did not work when I tried it;

http://www.parrotbyte.com/kbc/ferrari/308/Binnacle.htm

 

Basically the indicator lights are removed to see the attachement screws of the plate, leaving the gauges in it..

Then once the plate is lose the binnacle bolts, are there.

Not terribly hard except the lights are fragile 40 year old plastic, and breaking any of the gauges is bad news too

 

I recently removed my instrument cluster. I can add the following:

- The colored lenses on each of the four corner indicator lights (where the screws are located) can be removed by pulling outward. Sometimes the light bulb socket can be pushed inward out of its mounting frame thereby exposing the instrument panel mounting screws without breaking the mounting frame.

- Also a couple of very worthwhile modifications while the instrument cluster is out are:

https://www.ferrarichat.com/forum/threads/how-to-convert-instrument-cluster-lights-to-leds-with-factory-blue-green-tint.678683/#post-149178797

https://www.ferrarichat.com/forum/threads/308-328-oil-pressure-conversion-unit.485238/