NEW MODEL KIT THREAD | Page 109 | FerrariChat
Buy

NEW MODEL KIT THREAD

Discussion in 'Collectables, Literature, & Models' started by F1tommy, Jan 3, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 109 of 200
  1. Ferrari Envy

    Ferrari Envy Formula Junior

    Apr 27, 2009
    708
    Southern California
    Full Name:
    Cameron DeMille
    #2701 Ferrari Envy, Sep 14, 2016
    My MFH 917K came in this week. I bought it from Peter (ScaleAutoArt). I have a couple of Revell 1/12 kits that I have detailed, but this is a whole other world. Very exciting and intimidating at the same time.

    Tons of white metal, which is where I lack experience. I think I will be buying a magnetic polisher for this kit. I doubt this will be my last MFH kit, I have my eye on a few.

    I also have the Fein Design 1/12 Ford GT40 engine kit, which is equally as detailed.

    I am currently working on a 1/20 Lotus 79 Martini Version with the E.Jan (Hiro) conversion kit. It has a good amount of metal parts for me to work on
     
  2. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #2702 PeterWPro, Sep 14, 2016
    I see problems with your example as well ;) Nobody is perfect. I think you need to wait and see a built example [which I am planning to do soon] and then judge. Photos of a mock up can be deceiving.
     
  3. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #2703 PeterWPro, Sep 14, 2016
    MFH 335S Le Mans

    http://www.racingsportscars.com/photo/1957/Le_Mans-1957-06-23-007.jpg

    Some minor comments:

    Wind screen is a tad tall...easily fixed
    Exhaust is a little "fat" at the mid section and needs to be tucked in a little...easily fixed

    Body Profile photos look better then the mock up...which tends to throw one off with all of the white surfaces.

    I don't see any major problems yet.
     
  4. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #2704 PeterWPro, Sep 14, 2016
    Enjoy the build. Let me know how the polisher works out, I still need to consider the advantages.
     
  5. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2705 F1tommy, Sep 14, 2016
    Last edited by a moderator: Sep 7, 2017
  6. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #2706 PeterWPro, Sep 14, 2016
    Photos (and their angle or lens) can also be misleading ��
     
  7. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2707 F1tommy, Sep 15, 2016
    Last edited by a moderator: Sep 7, 2017
  8. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2708 F1tommy, Sep 15, 2016
    Last edited by a moderator: Sep 7, 2017
  9. pawlie

    pawlie Formula Junior

    May 10, 2006
    369
    Philly, USA
    Full Name:
    Paul F.
    #2709 pawlie, Sep 15, 2016
    Thank you for posting the instructions and all the details Tommy. I think I'm going to need to start playing the lottery!
     
  10. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2710 F1tommy, Sep 15, 2016
    Last edited by a moderator: Sep 7, 2017
  11. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2711 F1tommy, Sep 17, 2016
    Last edited by a moderator: Sep 7, 2017
    One more post on the Hiro 1/12th 315/335S's.... They are now available....


    Not that many parts...Should be simple to build.....:) Only around 300 parts plus a little over 125 photoetch parts.


    Oh, forgot about the wire wheels...:(
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  12. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2712 F1tommy, Sep 19, 2016
    Last edited by a moderator: Sep 7, 2017
  13. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #2713 PeterWPro, Sep 19, 2016
    I have kits arriving later this week...looking forward to doing a quick "mock up" to try and bring more light to the stated "issues" ;)
     
  14. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #2714 PeterWPro, Sep 19, 2016
    If built with more finesse then the photo I imagine it could be a nice project to consider. Would be even better with all opening panels...hmmm.
     
  15. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2715 F1tommy, Sep 19, 2016
    I really hope they do the 330LMB in 1/12th also.
     
  16. tomgt

    tomgt F1 Veteran
    Rossa Subscribed

    Feb 22, 2004
    7,160
    Netherlands
    Full Name:
    Tom Wiggers
    #2716 tomgt, Sep 21, 2016
  17. furoni

    furoni F1 World Champ

    Jun 6, 2011
    13,983
    Vila Verde
    Full Name:
    Pedro Braga Soares
    #2717 furoni, Sep 21, 2016
    Hi guys, sorry for hijacking a bit but, do any of you have colour pictures or any idea how was the interior of the 62 330 tri? BBr made their model grey on the inside, Looksmart painted the doors red like the exterior....and i don't find any picture sof the original...
     
  18. tomgt

    tomgt F1 Veteran
    Rossa Subscribed

    Feb 22, 2004
    7,160
    Netherlands
    Full Name:
    Tom Wiggers
    #2718 tomgt, Sep 21, 2016
    Last edited by a moderator: Sep 7, 2017
  19. tomgt

    tomgt F1 Veteran
    Rossa Subscribed

    Feb 22, 2004
    7,160
    Netherlands
    Full Name:
    Tom Wiggers
    #2719 tomgt, Sep 21, 2016
    Last edited by a moderator: Sep 7, 2017
  20. NürScud

    NürScud F1 Veteran

    Nov 3, 2012
    7,308
    #2720 NürScud, Sep 21, 2016
    This is great. Especially in the 1958 Tour De France colours!
     
  21. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2721 F1tommy, Sep 21, 2016
    Last edited by a moderator: Sep 7, 2017
    They are both wrong...That's why I don't collect diecasts:)


    Back to new model kits......
    Image Unavailable, Please Login
     
  22. furoni

    furoni F1 World Champ

    Jun 6, 2011
    13,983
    Vila Verde
    Full Name:
    Pedro Braga Soares
    #2722 furoni, Sep 22, 2016
    Thanks Tom!! :) maybe i'll turn to kits someday...when i have the time to learn hoe to build them..or find a nice modeler!!
     
  23. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2723 F1tommy, Sep 22, 2016
    Last edited by a moderator: Sep 7, 2017
    Well I have the Hiro 315/335 chassis #0674 now. I think the body looks great from the front and side. Hard to tell 100% about the rear. Those cut outs make it look strange. Also the top rear view looks like it tapers in to much, but I might be wrong . Will post more real car photos to compare. Overall very very nice kit!! When this one sells out grown men will be begging for one.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  24. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,477
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #2724 F1tommy, Sep 22, 2016
    Last edited by a moderator: Sep 7, 2017
  25. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #2725 PeterWPro, Sep 22, 2016
    Last edited by a moderator: Sep 7, 2017
    Personally I think it all looks pretty spot on. Ride height needs to be set better and the front wheel will sit more forward but in the flesh I see no issue here.This is going into prep, primers and red paint right away now that I have test fit the critical chassis parts. The "bonnet" will require some additional shaping and trimming as will the boot lid. The rest of the parts like the rear side vents fit perfectly.

    I will be happy to start a build thread if there is enough interest. Not sure if it violates any rules.

    This will be the #7 Le Mans car [on spec] and one will be converted to a road going version in black with tan leather interior at clients request.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
Page 109 of 200

Share This Page