Trying to fit the Clarion unit to my 2013 Euro spec FF Have removed all lower trim but keep thinking the are some hidden screws above or around passenger info display does anyone know? thanks
What you really need is a repair manual on the FF but I'm not sure if Ferrari has released it being it is not a current model anymore. Would be nice if anyone has one that can send a copy as it would help the post and others do minor improvements.
It's underneath. How crazy. I'm actually doing this install tomorrow and I have he Ferrari workshop info on how to remove. There are screws underneath
Maybe this helps. I have the whole workshop manual I can post for you tomorrow. Sent from my iPhone using Tapatalk
Did you figure this out? It looks like per Ferrari manual the entire dash needs to come out. I'd like to do this upgrade too, but not if I need to remove the entire dash.
Very very cool. Where did you buy the upgraded unit? I so want to do this. Sent from my HTC One M9 using Tapatalk
Client went wobble very common in Uk Cancelled the job because i ran into a problem could not trigger the amp it needs a coded signal on can line Took some pictures not sure how to post If removing dash be very carefully if it has passenger info display it can twist and snap glass You will have to remove everything right across the dash end caps first first of the hidden screws My car RHD so you might have to reverse stuff glovebox side hidden screw for fill in panel by glovebox edge also screw at bottom dont pull till removed Drivers side there is a bracket behind heater pipe to door try not to displace heater pipe found it really hard to refit like 1 hour then suddenly fitted Hidden screws behind fusebox panel this panel has screw at base then pull backwards from base NOT top under steering wheel move the leather there are 2 hidden screws in there then just lots more screws every where But here's the killer above the radio are 2 screws that hold dash/top panel / media unit together These are at each side of media unit the only way to see them is put yourself in footwell then look up inside the dash by radio Look UP not Forwards screw hidden end of dash by column need to remove steering column shroud When you refit these must not cross thread if you do dash will rattle / creek Not being rude these 3mm screws round of in a second even with using Snap On tools I bought spares Base of radio bracket 3mm screws but they seem to be glued or gun up i had to carefully drill 1 out even through i heated them first with a heat gun think i have covered most of it when you remove dash i started at end nearest steering wheel got it loose then put a screw driver on passenger side you will see the pins and gently prised after that a good hard pull and panel out watch display wires very fragile think thats all just be cautious
You can buy from the Ferrari dealer for $1200. The install sounds like so much work. Is the new unit worth all the install work? Sent from my iPhone using Tapatalk
The job would be worth it in terms of new tech integration But audio side would be very involved new amp and speaker rewire Personally i would say NO unless amp turn on issue is solvable every time you accelerate the noise is music part of ferrari V12 ownership I install for a living just feel it wont enhance ownership or resell value of this model
Thanks so much, do you have a part number I can reference. My local dealer is clueless to this or does not have much interest in helping.
Wish i was Stateside then we could get a car to sort this The unit Brand really is up to you as long as it is what in the Uk we call Double Din The factory Supplied Unit is not a special or modified unit from Clarion It just has a ferrari Logo With Pioneer you could upload a JPEG have done this on another famous Italian Tractor brand Its a long Job i put a guide on my other post All the old style connections are provided by the factory Can adaptor Except the Amp turn If anyone has a system without an Amp its doable and looks good It maybe possible to rewire the factory amp and speakers but the moron i was doing the install for decided not to continue and cancelled the installation
