Dino 246 Ignition | FerrariChat
Buy

Dino 246 Ignition

Discussion in '206/246' started by nik1973, Jan 31, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. nik1973

    nik1973 Rookie

    Jan 31, 2017
    2
    #1 nik1973, Jan 31, 2017
    So the Dino has not been used in a few years and now does not want to start, it turns over but no spark, points look ok but nothing at any plugs.

    There seem to be lots of ignition systems listed but not mine, if its not original it has been on 30 years plus, its a blue box made by Bosch 0 227 051 021

    Also have bosch resistors and coil.
    If anyone has any knowledge on this I would appreciate it, thanks
     
  2. Tobi

    Tobi Karting

    Jun 24, 2011
    116
    Alto Palatinato
    #2 Tobi, Jan 31, 2017
  3. Eltel246

    Eltel246 Karting

    May 14, 2012
    181
    London
    Full Name:
    Charles Hill
    #3 Eltel246, Mar 19, 2017
    Hi, Did you manage to rectify your problem.

    I have the exact same ignition system on my 246gt. Also have the same problem with getting no spark.

    The ignition packs are repairable I believe.
     
  4. dinogts

    dinogts Formula 3
    Owner Rossa Subscribed

    Feb 15, 2005
    2,466
    Hanging with Thor Thorson
    #4 dinogts, Mar 20, 2017
    Welcome to the 206/246 Dino section of FCHAT with your first post. If you could post some photos of your current ignition system, or a link to your photos of your ignition, some of us here (not necessarily me!) might be able to make more specific suggestions. [I can't remember if you can post photos if you are not subscribed to FCHAT or not . . . ]

    Mark
     
  5. dinogts

    dinogts Formula 3
    Owner Rossa Subscribed

    Feb 15, 2005
    2,466
    Hanging with Thor Thorson
    #5 dinogts, Mar 20, 2017
    Wow, two first time posters in the same thread with apparently the same problem.

    Welcome to the 206/246 section of FCHAT!

    Mark
     

Share This Page