OEM Fender Badge Fitment | FerrariChat
Buy

OEM Fender Badge Fitment

Discussion in '348/355' started by judd10, Sep 30, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. judd10

    judd10 Formula Junior
    Silver Subscribed

    Dec 30, 2006
    479
    Seattle, WA
    #1 judd10, Sep 30, 2017
    A while back, I purchased OEM fenders (badge style) and OEM fender badges. I was cleaning up the garage tonight and thought that I'd try fitting the badges on the fenders. When I put the RH/LH (Dx/Sx) specified badge on each respective side for the first time, they didn't fit! It turns out that the badges fit nearly perfectly if you swap sides (Dx on left and Sx on right)!

    I have two pairs of OEM badges and tried the other set... and the exact same thing! Third pic is with the badges on the designated correct side (hard to see, but they stick out and don't fit flush). Fourth pic is with the badges on the opposite sides, where they fit nicely. Weird!

    Has anyone else with OEM fenders... who's had to replace or fit new ones... find that the designated badge part numbers appear reversed???

    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
    ShineKen likes this.
  2. Robb

    Robb Moderator
    Moderator Lifetime Rossa Owner

    Feb 28, 2004
    14,341
    Full Name:
    Robb
    #2 Robb, Sep 30, 2017
    Looks nice. Wish I had bought a set of the fenders.

    Robb
     
  3. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    3,229
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    #3 m.stojanovic, Oct 1, 2017
    Or the holes in the recesses of your fenders were punched the wrong way around. Were the fenders on a special offer?
     
  4. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #4 Dave rocks, Oct 1, 2017
    I'm surprised it's not one part number for both sides - no idea why they would make the shields handed...
     
  5. judd10

    judd10 Formula Junior
    Silver Subscribed

    Dec 30, 2006
    479
    Seattle, WA
    #5 judd10, Oct 1, 2017
    The issue is with the curvature of the shields not matching the curvature of the recesses in the fenders. The fenders were purchased through two different suppliers... one in Europe and one in the US. Right hand side fender was really tough to find.
     
  6. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    3,229
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    #6 m.stojanovic, Oct 1, 2017
    From the fender pictures, it appears that the bottom holes are offset forwards to the vertical line through the bottom tip of the recess (is this the case?) and that this is what determines left and right badges. The bottom studs on the badges should be offset accordingly but, in you case, it seems to be the other way round (the holes or the badge studs).
     
  7. judd10

    judd10 Formula Junior
    Silver Subscribed

    Dec 30, 2006
    479
    Seattle, WA
    #7 judd10, Oct 2, 2017
    Wow - great observation and thanks for the feedback.
     
  8. judd10

    judd10 Formula Junior
    Silver Subscribed

    Dec 30, 2006
    479
    Seattle, WA
    #8 judd10, Mar 9, 2018

    Attached Files:

  9. darrenliu

    darrenliu Formula Junior

    Jun 24, 2008
    450
    Melbourne Australia
    Full Name:
    Darren Liu
    #9 darrenliu, Mar 9, 2018
    Can anyone tell me, with 100% confidence, that if the studs on the back of the OEM F355 shields are removed, that they will fit the curvature of the 355 without the recess? i bought a damaged 599 oem shield, removed the studs and tried test fitting it to my 355 and the curvature on the body was too much for the shield to fit.
     
  10. 97 Spider

    97 Spider Formula 3

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    #10 97 Spider, Mar 9, 2018
    Just curious what made you think the 599 shields would work in the first place? Every model has different curvatures on their fenders and badges with different part numbers to match that curvature. It doesn’t make sense to even think it would be the same.
     
    ShineKen likes this.
  11. darrenliu

    darrenliu Formula Junior

    Jun 24, 2008
    450
    Melbourne Australia
    Full Name:
    Darren Liu
    #11 darrenliu, Mar 10, 2018
    They were really cheap, so i bought them. one was damaged but one was good. just wanted to add them to my ferrari collection too.
     
  12. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #12 taz355, Mar 11, 2018
    Well Now we have proof of what we all ready knew.
    They do look good on the shelf though I am sure.
     
    darrenliu likes this.
  13. ShineKen

    ShineKen F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    19,892
    Southern California
    Full Name:
    Nostradamus
    #13 ShineKen, Sep 17, 2023

    It appears we both have unobtanium 355 recessed fenders :).

    Good job on discovering the mix-up by Ferrari on the part # for shields. I’m going to assume I should be on the hunt for a passenger side shield since 64174200 is really for the driver’s side?




    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  14. ShineKen

    ShineKen F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    19,892
    Southern California
    Full Name:
    Nostradamus
    #14 ShineKen, Sep 17, 2023

Share This Page