Valve cover chemical strip. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Replacement lower strut bushing. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
More radio wiring diagnostic work. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Someone ran a new wire going to the fuel pumps. This is from failing fuel pumps drawing to much power. Were going to replace the pumps, remove the wire, and repair the old wiring. Image Unavailable, Please Login
Theres allot of patch wire repair work and the hvac vent is dripping coolant. Were going to remove the dash to expose all the wiring and repair the hvac leak. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Dan- You guys are performing major surgery on this one. Better check and see if the valve guides are gone, too.
I have these the struts off on my car. How can you check if these joints require replacement. Mine do not have play but do not sit quite straight
Hi This is the master cylinder. Slave cylinder is together with the throw out bearing. How old is the cylinder and how many miles on it ? Is there a repair kit possible or do you change the complete cylinder ? Daniel
Excuse my wording. Now I'm second guessing if I know anything about cars. Roughly 40k miles and its original the car. They sell the cylinder individually.
Leaking HVAC removed. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
There is a like button for posts on this site. However, this picture needs a "slap in the forehead, scream in agony & dismay" button!!
Here are my mine. I sent them to Bilstein as I had access to a lift for a few weeks.. Image Unavailable, Please Login
bilstien won’t do them any longer. They referred me to a company in Sonoma CA who then referred me to Delta Vee
I wish. They stoppped in the US. I also have the selector seal leaking & I believe only delta vee can fix that.