Help in removing 550 gearbox filter | FerrariChat

Help in removing 550 gearbox filter

Discussion in '456/550/575' started by stevegtsi, May 18, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. stevegtsi

    stevegtsi Formula Junior

    Joined:
    Feb 21, 2004
    Messages:
    316
    any suggestions? removed the two 8mm fasteners and it won't budge. thanks
     
    stevegtsi, May 18, 2018
    #1
  2. AVIMAX

    AVIMAX Formula Junior

    Joined:
    Aug 5, 2014
    Messages:
    711
    Location:
    Toronto
    Full Name:
    Ryan
    I used a very small flat screwdriver (optical size) to gently pry between the filter and the gearbox. The o-ring is causing the "stiction".
     
    AVIMAX, May 18, 2018
    #2
  3. dersark_painclinic

    dersark_painclinic Formula Junior

    Joined:
    Mar 8, 2005
    Messages:
    981
    Location:
    Glendale, CA
    Full Name:
    Lazik Der Sarkissian
     
    dersark_painclinic, May 18, 2018
    #3
  4. dersark_painclinic

    dersark_painclinic Formula Junior

    Joined:
    Mar 8, 2005
    Messages:
    981
    Location:
    Glendale, CA
    Full Name:
    Lazik Der Sarkissian
    If the screw is not stripped and nut is turning then nylon is might holding the nut. May try pulling and turning the nut with your fingers Remove it.
     
    dersark_painclinic, May 18, 2018
    #4
  5. dersark_painclinic

    dersark_painclinic Formula Junior

    Joined:
    Mar 8, 2005
    Messages:
    981
    Location:
    Glendale, CA
    Full Name:
    Lazik Der Sarkissian
    Sorry , you already removed the nuts, so Avimax is right
     
    dersark_painclinic, May 18, 2018
    #5
  6. stevegtsi

    stevegtsi Formula Junior

    Joined:
    Feb 21, 2004
    Messages:
    316
    Thank you both
     
    stevegtsi, May 18, 2018
    #6

Share This Page