What are these parts and other resto questions.. | FerrariChat

What are these parts and other resto questions..

Discussion in '365 GT4 2+2/400/412' started by Tojo, Sep 6, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Tojo

    Tojo Formula Junior

    Apr 12, 2002
    481
    Sydney
    Full Name:
    Tim
    These bits were in a box of random parts and hardware that came with my project 400. Can anyone tell me what they are or where they go?
    I'm also wondering what finish does the boot closing catch on the boot itself have, silver or passivated yellow like the latch?And what finish does the bonnet opening lever have? Is it chrome/silver plated, is the knob on the end different to the shaft? Thanks very much in advance! Image Unavailable, Please Login

    Sent from my SM-G935F using FerrariChat.com mobile app
     
  2. ricar116

    ricar116 Formula Junior

    Aug 2, 2005
    409
    Bolivar, Missouri
    Full Name:
    Rick Carr
    The top piece looks like a suspension bushing. The two lower pieces do not look familiar. The finish looks as though they have never been painted, maybe fabbed for unknown purpose.
     
  3. rovexienus

    rovexienus Formula Junior
    Silver Subscribed

    Jun 10, 2010
    562
    Sainte Colombe, France (near Lyon)
    Full Name:
    Jean-Michel Savary
    Could the bottom part be the striker plate for the front bonnet?
     
  4. rovexienus

    rovexienus Formula Junior
    Silver Subscribed

    Jun 10, 2010
    562
    Sainte Colombe, France (near Lyon)
    Full Name:
    Jean-Michel Savary
    Tojo likes this.
  5. Tojo

    Tojo Formula Junior

    Apr 12, 2002
    481
    Sydney
    Full Name:
    Tim
    Thanks very much. That’s helpful



    Sent from my iPad using FerrariChat.com mobile app
     
  6. France

    France Rookie

    Jul 6, 2016
    12
    Germany
    Full Name:
    Frank
    Good day, maybe solved in the meantime but nevertheless:

    The piece in the middle of the photo is a mounting bracket at the rear side of the radiator for the oil radiator or ATF radiator.
    The piece beneath in the photo is the hinge for the front hood (likely right side).
     
    Tojo likes this.
  7. Tojo

    Tojo Formula Junior

    Apr 12, 2002
    481
    Sydney
    Full Name:
    Tim
    I did discover the bottom piece was for the bonnet hinge, but had no idea about the oil cooler bracket so that's very helpful thanks. I'm still unsure where that bushing goes

    Sent from my SM-G935F using FerrariChat.com mobile app
     
  8. christc

    christc Formula Junior

    Mar 3, 2013
    444
    Germany
    Part at top is in my opinion a front A Frame bushing as suggested in second post going into the frame as used in 250 or 330 - see photo part 7. I dont think it belongs to 365-412 but perhaps someone knows differently?

    Christopher
    Image Unavailable, Please Login
     
  9. samsaprunoff

    samsaprunoff F1 Rookie
    Silver Subscribed

    Jun 8, 2004
    4,160
    Edmonton, AB Canada
    Full Name:
    Sam Saprunoff
    Good day Christopher,

    I would have to agree with your assessment insofar as the part in question not being associated with the 365/400 suspension pieces. I say this, as I am involved in rebuilding my 365 suspension (which is very similar to the 400), and none of the bushings I have encountered are anything like the one posted by Tim.

    That being said your sleuthing efforts that the part belongs to a 250/300 looks very compelling, well done!

    Cheers,

    Sam
     

Share This Page