No more 355 for a while :( | FerrariChat
Buy

No more 355 for a while :(

Discussion in '348/355' started by kenneyd, Oct 26, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 2
  1. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    2,027
    NE FL
    Full Name:
    Ken
    #1 kenneyd, Oct 26, 2018
    So they have a decade long construction project going on in my town that was obviously bid out to the lowest bidder. Well, it finally made it to the only exit of my neighborhood.
    The pictures dont do it justice, but its steep. I carefully experimented with taking it at extreme angles and its not possible, especially going down.
    I'm going to call the state and see if there is anything that can be done. I would imagine there has got to be some sort of DOT guidelines that restrict the slope?
    From the other sections they have done this, it was about 3-6 months before they finished the section.




    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #2 taz355, Oct 26, 2018
    Next time they are working out there see which engineering company is looking after the project.
    Ask the engneer to come over and show him the problem and they can fix it in 5 minutes i am sure
     
    Dave rocks and crinoid like this.
  3. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #3 taz355, Oct 26, 2018
    If they cant !!!!!

    MOVE!!!!
     
  4. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,426
    Sydney
    Full Name:
    Ian Riddell
    #4 Qavion, Oct 26, 2018
    Speed humps and high anti-reversing spikes have been installed at my local beach promenade. Both incompatible with F355s.

    If your car has a legal vehicle height, surely they have to take action?
     
  5. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #5 taz355, Oct 26, 2018
    I am in the construction buisness and generally allways goes to low bidder.

    Also generally the low bidder has to comply with very specific specifications. The work they are doing is in conjunction with the wishes of the state I am sure.


    Or check this out end of problem

    https://iliftsystems.com/
     
  6. Wade

    Wade Three Time F1 World Champ
    Owner

    Mar 31, 2006
    32,793
    East Central, FL
    Full Name:
    Wade O.
    #6 Wade, Oct 26, 2018
    Or... risk assessment and mitigation. I.e. the fine for non-compliance is insignificant when compared to the profit. ;)
     
  7. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #7 taz355, Oct 26, 2018
    In Canada you either comply or wait for your money which now days is all ways significant.
    Our governments place too much weight on keeping rate payers happy but of course being the contractor many will think we all ways say that.
     
  8. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #8 taz355, Oct 26, 2018
    I am mostly talking base pave jobs and noncompliance towards specifications is usually very significant.

    They also usually have a traffic accomodation clause whichstates you must maintain traffic for rate payers or the state will and back charge you.

    In Canada lawyers generally do not win cases against counties or provinces. Very few cases award to the contractor
     
  9. Enzojr

    Enzojr F1 World Champ

    Dec 12, 2013
    14,001
    West of PDX
    Full Name:
    Tomy
    #9 Enzojr, Oct 27, 2018
    It that a spoiler on the front of your car ?
     
  10. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    2,027
    NE FL
    Full Name:
    Ken
    #10 kenneyd, Oct 27, 2018
    Yes, a carbon fiber lip. It really only makes the noise about 1/2"lower, but it does make it~3"longer on an already long over hang
     
  11. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #11 taz355, Oct 27, 2018
    Lets see a froNt end view
     
  12. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    2,027
    NE FL
    Full Name:
    Ken
    #12 kenneyd, Oct 27, 2018
    tres55, Dave rocks and F355Bob like this.
  13. 76Steel

    76Steel Formula 3

    Sep 8, 2007
    1,482
    New Jersey
    Full Name:
    Mike
    #13 76Steel, Oct 27, 2018
    Awesome looking 355. How do you like the Escas (tires) on it?
     
  14. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    2,027
    NE FL
    Full Name:
    Ken
    #14 kenneyd, Oct 27, 2018
    I think it was Kumho attempt to copy the MPSS, exact same tread pattern etc.
    They drive fine, however I put the stock wheels with MPSS on them when i go to the track so i cant compare performance
     
  15. 76Steel

    76Steel Formula 3

    Sep 8, 2007
    1,482
    New Jersey
    Full Name:
    Mike
    #15 76Steel, Oct 27, 2018
    Okay
    Thanks. I really like Kumho tires generally, but I was not sure how they would perform on an exotic. Great option to have. Thank you for your input.
     
  16. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #16 taz355, Oct 27, 2018
    Nice lookin nose
     
  17. INTMD8

    INTMD8 F1 Veteran
    Owner Silver Subscribed

    Jun 10, 2007
    6,794
    Lake Villa IL
    #17 INTMD8, Oct 28, 2018
    Hard to tell but appears wide, can you approach from an angle?
     
  18. WATSON

    WATSON Two Time F1 World Champ
    Owner Rossa Subscribed

    Sep 9, 2010
    23,813
    WI
    #18 WATSON, Oct 28, 2018
    Well, that stinks.

    Wonder what the response will be after you pen a letter to the state decrying how horrible your life has become because you can not drive your Ferrari.
    I suspect, once they are done laughing, they will get right on it! ;)

    Sorry man...I agree with the others here, asking the on site crew to reduce the slope is probably your best bet.
     
  19. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    2,027
    NE FL
    Full Name:
    Ken
    #19 kenneyd, Oct 28, 2018
    I actually think the nose may clear going up, then the problem is bottoming out at the top of the ramp.
    They removed the westbound Lanes, now this ramp joins into the eastbound Lanes, which are actually sloped away making a pretty sharp crest.
    Going at a total angle is an option as well, but there still is a risk of bottoming out and my wheels will rub on the fenders at extreme articulation.
    The main thing I'm worried about is going back down it I know for sure the nose will just plow into the ground, Regardless of angle.

    Therein lies the biggest issue, LOL. I will probably take my old Mercedes or Saab over and explain it to them tomorrow as nice as I can. I just don't want to sound like the stereotypical ********* "exotic owner"

    The thing that sucks is every time they lay a new layer of gravel or base, they remove it and replace it. So if they fix it this week, next week it'll be redone crappy again
     
  20. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #20 taz355, Oct 28, 2018
  21. 308 GTB

    308 GTB F1 World Champ
    Rossa Subscribed

    Feb 7, 2002
    11,757
    New Jersey
    Full Name:
    Barry Wolinsky
    #21 308 GTB, Oct 28, 2018
    Maranello Skunk Works Front Lift Kit...





     
  22. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #22 taz355, Oct 29, 2018
    Cool who makes that one.
     
  23. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    2,027
    NE FL
    Full Name:
    Ken
    #23 kenneyd, Oct 29, 2018
    "m-tecnolgia" out of japan.


    Today they laid a layer of base or something. I went out there and spoke to the guys while there were re-doing the ramps. I just told them I couldn't get out with my others car. He said that this next one would be better. We will see, the weather this week is like 73 and sunny every day, want to drive!
     
  24. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #24 taz355, Oct 29, 2018
    Talking to the crew is not as good as the engineer who supervises them.
    Get their name from the crew foreman or superintendant.
     
  25. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #25 Dave rocks, Oct 29, 2018
    Go to the site with coffee and donuts, make friends. Yes, tell them you have a Ferrari. Just be cool. :cool:

    BTW, your car looks awesome in every way even though its a bastard child :D
     
    kenneyd and WATSON like this.
Page 1 of 2

Share This Page