Looking for 355 plates | FerrariChat
Buy

Looking for 355 plates

Discussion in '348/355' started by Porker993, Jan 5, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Porker993

    Porker993 Rookie

    Oct 27, 2018
    31
    Uk
    Full Name:
    Kevin Priest
    #1 Porker993, Jan 5, 2019
    I recently bought a 95 355 Berlinetta in manual and it had the engine shields missing , I’ve now located and bought both of those shields in new old stock but as they are new obviously there’s no plates attached .
    So I am Looking for either a r/h engine bay vertical Protection shield complete with the “Ferrari Agip” plate and engine spec plate or I would like to buy just the plates only which would be preferred . Anyone either have one or know of a company that reproduces them . Pic attached of what I am after .
    Cheers

    Image Unavailable, Please Login
     
  2. Porker993

    Porker993 Rookie

    Oct 27, 2018
    31
    Uk
    Full Name:
    Kevin Priest
    #2 Porker993, Jan 5, 2019
    If you own a car with the plates above any chance of measuring them for me please ?
    Cheers
     
  3. andyw355

    andyw355 Karting

    Jul 5, 2011
    72
    Australia
    Full Name:
    Andy
    #3 andyw355, Jan 5, 2019
    Eurospares uk sell the RHS one, not sure if anyone sells the silver LHS one.


    Sent from my iPhone using Tapatalk
     
  4. Porker993

    Porker993 Rookie

    Oct 27, 2018
    31
    Uk
    Full Name:
    Kevin Priest
    #4 Porker993, Jan 5, 2019
    Thanks for info but I can’t find one on there site , only can see the shell version. Which is wrong .
    Have you a link to the correct one ?
     
  5. 97 Spider

    97 Spider Formula 3

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    #5 97 Spider, Jan 5, 2019
    I have a couple sets of these. I think they were from later year 355s though and I’m not sure they are the same. I’ll try to dig them up today and see if they are right. You can have them for the cost of shipping.
     
  6. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #6 Dave rocks, Jan 5, 2019
    It would be beneficial if you listed your location as I believe different markets have different plates. There is a member of the forum who reproduces them but the name escapes me. Elliott know and will likely post when he sees this.
     
  7. Porker993

    Porker993 Rookie

    Oct 27, 2018
    31
    Uk
    Full Name:
    Kevin Priest
    #7 Porker993, Jan 5, 2019

    Sorry yes good idea I am in the Uk .
     
  8. Porker993

    Porker993 Rookie

    Oct 27, 2018
    31
    Uk
    Full Name:
    Kevin Priest
    #8 Porker993, Jan 5, 2019
    Thanks very much I’ll await your reply .
     
  9. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #9 Dave rocks, Jan 5, 2019
    Cool. I would add that to your profile as it may come in handy again ;)
     
  10. DrStranglove

    DrStranglove FChat Assassin
    Owner Rossa Subscribed

    Oct 31, 2003
    31,606
    Google Maps
    Full Name:
    DrS
    #10 DrStranglove, Jan 5, 2019
    You can also ask Ricambi. He's a sponsor here, too.
     
  11. MAD828

    MAD828 F1 Rookie

    Oct 8, 2011
    2,632
    Sydney
    Full Name:
    Elliott Caras
    #11 MAD828, Jan 5, 2019
    Image Unavailable, Please Login Image Unavailable, Please Login The LHS has nothing on it the RHS has a metal plate with the Catalyst sticker for emissions control diagram. 355rockit (Vas) reproduces the sticker only, not the metal plate it attaches to, which would be easy enough to fabricate its alloy and anodized black.

    The Ferrari AGIP plate I have never seen available for sale separately.

    Also to note the 95 engine sills are a different and much heavier wrinkle in their finish compared to later years. There is also room on the catalyst plate for another sticker which is market dependent I reproduced the Australian delivered version of this sticker for my own car. There are also two holes unused on the RHS sill.
     
  12. Porker993

    Porker993 Rookie

    Oct 27, 2018
    31
    Uk
    Full Name:
    Kevin Priest
    #12 Porker993, Jan 6, 2019
    Thanks for posting but uk cars didn’t have this type of emissions sticker.
    I agree with nothing in the l/h side but on the r/h side It is possible I only need the lubrication “Ferrari Agip” plate as I’ve now looked at my new shield and it’s only got 2 small holes for 1 plate .
     
  13. MAD828

    MAD828 F1 Rookie

    Oct 8, 2011
    2,632
    Sydney
    Full Name:
    Elliott Caras
    #13 MAD828, Jan 6, 2019
    Image Unavailable, Please Login

    Here is a 95 UK spec car. It has the two plates you pictured in the first post.
     
  14. fdekeu

    fdekeu Formula Junior
    Silver Subscribed

    Jun 19, 2008
    632
    Belzium
    Full Name:
    Frank
    #14 fdekeu, Jan 6, 2019
    Brian
    I would like a set as shown in the first post of Porcher993
    I will send you a PM
     
  15. Porker993

    Porker993 Rookie

    Oct 27, 2018
    31
    Uk
    Full Name:
    Kevin Priest
    #15 Porker993, Jan 6, 2019
    If they are not exactly right then any chance of letting me know the dimensions as I’ve found someone to make them if needed .
    Cheers kevin
     
  16. Garvin

    Garvin Rookie

    Jul 15, 2012
    34
    Cambridgeshire
    #16 Garvin, Jan 8, 2019
    Kevin,

    I do not have any of the Agip plates but I did have a batch of the 'type approval' plates made up some time ago:

    Image Unavailable, Please Login

    These are the correct plates for a UK spec 95/96, 2.7 Motronic, Manual Berlinetta. I have a few left - contact me if interested.
     
    swoshsteffo, taz355, MAD828 and 1 other person like this.
  17. andyw355

    andyw355 Karting

    Jul 5, 2011
    72
    Australia
    Full Name:
    Andy
    #17 andyw355, Jan 10, 2019
    Sorry no, I could only find this one.


    Sent from my iPhone using Tapatalk
     
  18. andyw355

    andyw355 Karting

    Jul 5, 2011
    72
    Australia
    Full Name:
    Andy
    #18 andyw355, Jan 10, 2019
    I am interested, mine is missing. Please PM me with details. Cheers


    Sent from my iPhone using Tapatalk
     
  19. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #19 taz355, Jan 10, 2019
    Thats nice plate
    Whats a 99 usa look like?
     
  20. Garvin

    Garvin Rookie

    Jul 15, 2012
    34
    Cambridgeshire
    #20 Garvin, Jan 11, 2019
    I’m afraid I have no idea what a 99 USA plate looks like. I do know that they can vary depending on the version of the car in the U.K. and pictures of USA vehicles I have seen do not have this particular plate fitted.
     
  21. TrojanFan

    TrojanFan F1 Veteran
    Owner Silver Subscribed

    Nov 17, 2008
    5,179
    So. CA & NV
    Full Name:
    Peter
    #21 TrojanFan, Jan 15, 2019

    Has Vas (355rockit) been around here lately? I know he sold his 355 a few years ago. I see him occasionally at the Stoogefest events but not in the last year.
     
  22. swoshsteffo

    swoshsteffo Rookie

    Mar 9, 2018
    9
    Full Name:
    stefan bjallsjo
    #22 swoshsteffo, Nov 15, 2019
    Hi , I’m interested in one of this plates
     

Share This Page