Anyone know the story? ebay 206 | Page 28 | FerrariChat

Anyone know the story? ebay 206

Discussion in '206/246' started by silver1331, Mar 4, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. pshoejberg

    pshoejberg Formula 3 Silver Subscribed

    Joined:
    Dec 22, 2007
    Messages:
    1,826
    Location:
    Denmark
    Full Name:
    Peter H
    That is the first time I see the detail with the SP1 bend up into each corner. That can not be how it was done on the early L series I assume? I researched this detail quite alot when I assembled my car and concluded as per picture below. Image Unavailable, Please Login

    Best Peter
     
  2. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
    Peter, it`s the same on untouched, one owner, #00714. Should have been original on your Dino too. Attached picture of #00714. Most of SP1 seal gone… as with most Dinos. Very difficult to find a car with the original seal still in place…

    Image Unavailable, Please Login
     
  3. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
    DinoLasse, dgt and ME308 like this.
  4. pshoejberg

    pshoejberg Formula 3 Silver Subscribed

    Joined:
    Dec 22, 2007
    Messages:
    1,826
    Location:
    Denmark
    Full Name:
    Peter H
     
  5. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
    cool... will look into this….
     
  6. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
    finally found the correct kill switch... Lucas SSB103
    the original holes in the back wall towards the engine bay fit 100% to this period correct switch... only question remains how they fit the trigger cable coming from outside B-pillar.
    "Lucas SSB103 battery isolator switch. This unit has a third terminal which connects to the case (ie earth) when the switch is switched off. This can be used for earthing the contact breaker to kill the engine when the switch is turned to off. Knob can be removed from switch by removing the circlip from the end of the knob shaft."

    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  7. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
  8. dignini

    dignini Formula 3

    Joined:
    Aug 21, 2005
    Messages:
    1,348
    Location:
    NJ
    Full Name:
    Luigi Marazzi
    amazing work. fun to follow,
    will you be at Ferrari Championships next month?
     
    Sergio Tavares likes this.
  9. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
    no… can`t make it to Monza....
     
    Sergio Tavares likes this.
  10. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
  11. 4CamGT

    4CamGT F1 Rookie

    Joined:
    Jun 23, 2004
    Messages:
    2,798
    Location:
    Southern California
    Sergio Tavares likes this.
  12. Sergio Tavares

    Sergio Tavares Formula 3

    Joined:
    Nov 15, 2018
    Messages:
    1,308
    Full Name:
    Sergio Tavares
    Great works Matthias,
    che spettacolo

    One small thing,
    Isn't this more correct to be M6-1.0 x 14mm Allen head for all door striker and lock set fastener
    not slot screw?
    Please forgive if bad question

    Sergio
     
  13. Sergio Tavares

    Sergio Tavares Formula 3

    Joined:
    Nov 15, 2018
    Messages:
    1,308
    Full Name:
    Sergio Tavares
    Great works Matthias,
    che spettacolo

    One small thing,
    Isn't this more correct to be M6-1.0 x 14mm Allen head for all door striker and lock set fastener
    not slot screw?
    Please forgive if bad question

    Sergio

     
  14. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
    thanks Sergio... allen head is only correct for mid/late E-series Dinos....
     
    Sergio Tavares likes this.
  15. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
  16. racerboy9

    racerboy9 F1 Rookie Silver Subscribed

    Joined:
    Nov 3, 2003
    Messages:
    2,648
    It's psychedelic !!!
     
    Ralf Bsdenga likes this.
  17. G. Pepper

    G. Pepper Three Time F1 World Champ Rossa Subscribed

    Joined:
    Mar 15, 2012
    Messages:
    38,385
    Location:
    Texas/Colorado
    Full Name:
    George Pepper
    This is one of my all time favorite threads on f-chat. I've probably said this before. :)
     
    steved033 likes this.
  18. bs76

    bs76 Formula Junior

    Joined:
    Mar 6, 2005
    Messages:
    566
    Full Name:
    Björn Schlichting
    looks absolute fantastic...
    best wishes,
    BjörnS
     
  19. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
  20. GIOTTO

    GIOTTO F1 Rookie Consultant

    Joined:
    Dec 30, 2006
    Messages:
    3,916
    Location:
    France
    Well done Matthias. Looks great !
     
  21. pshoejberg

    pshoejberg Formula 3 Silver Subscribed

    Joined:
    Dec 22, 2007
    Messages:
    1,826
    Location:
    Denmark
    Full Name:
    Peter H
    Amazing graphics. It looks really cool.
     
  22. F1tommy

    F1tommy F1 World Champ Silver Subscribed

    Joined:
    Dec 15, 2007
    Messages:
    11,507
    Location:
    Sugar Grove USA
    Full Name:
    Tom Tanner
    Looks good. They got the idea from the 1970 Martini 917K's. Looks a lot like the Kyalami 2nd place car(beaten by the first 512M) that also ran several Euro races including the Paris 1000 in late 1970.
     
  23. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
    just received the exhaust system back from Ceramic Coating.....
    looks so original, won`t fade.... and protects the exhaust system from outside....
    ready to put on the car….



    Image Unavailable, Please Login
     
    synchro and dgt like this.
  24. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
  25. GermanDino

    GermanDino F1 Rookie

    Joined:
    Aug 14, 2007
    Messages:
    3,488
    Location:
    Germany
    Full Name:
    Matthias
    almost all stickers on the car now….. :)
    Götz thank you for your help!
    the round roof sticker might have to be a bit bigger….
    P. Hertcant needs to be amended a little bit too, has to be come a bit slimmer
     

    Attached Files:

    Last edited: Feb 6, 2019

Share This Page