Just purchased Novitec NF2 for 575 | FerrariChat
Buy

Just purchased Novitec NF2 for 575

Discussion in '456/550/575' started by ItalianOne, Jan 13, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ItalianOne

    ItalianOne Formula Junior
    Rossa Subscribed

    May 21, 2008
    619
    Mich
    Full Name:
    Kevin R
    #1 ItalianOne, Jan 13, 2019
    For anyone that knows? I just purchased a set of Novitec NF2 for the 575. I have not installed them yet on the car. The person I purchased the rims from had them on their 456. I asked him if he had spacers on the rims. He said he was not using spacers on his 456. First question is do I need to purchase spacers when I mount on the 575 or will the look fine as is? Also I have read in previous threads that for these rims to run correct on the 575 you must have the correct air pressure in the tires. How many pounds should they be?
     
  2. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,195
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #2 tazandjan, Jan 13, 2019
    Kevin- I ran 25 mm HE Type 2 spacers on the rear of my 575M. You will need to turn down the spacer bolts slightly because the reliefs on the back of the NF2s are smaller than on OEM 575M wheels. 32 psi all around worked fine for my tires.


    Image Unavailable, Please Login
     
    RoselliFCR, NE550 and ItalianOne like this.
  3. ItalianOne

    ItalianOne Formula Junior
    Rossa Subscribed

    May 21, 2008
    619
    Mich
    Full Name:
    Kevin R
    #3 ItalianOne, Jan 18, 2019
    Thanks Terry! You always give the best advice. I will post some pics of the car once the rims are installed.
     
  4. henryr

    henryr Two Time F1 World Champ
    Silver Subscribed

    Nov 10, 2003
    22,422
    Atlanta
    Full Name:
    Juan Sánchez Villa-L
    #4 henryr, Jan 18, 2019
    do u need to run spacers on the rear ?
     
  5. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,195
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #5 tazandjan, Jan 18, 2019
    Henry- Chance they will rub on the inside otherwise. They are 12.5" wide in the rear.
     
  6. ItalianOne

    ItalianOne Formula Junior
    Rossa Subscribed

    May 21, 2008
    619
    Mich
    Full Name:
    Kevin R
    #6 ItalianOne, Jan 18, 2019
    Can I use the same factory wheel bolts that came on the 03 575 or do I have to buy aftermarket?
     
  7. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,195
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #7 tazandjan, Jan 19, 2019
    Same factory bolts. These wheels were designed for Ferraris. Center caps fit, too.
     
    ItalianOne likes this.
  8. JohnnyRay

    JohnnyRay F1 Rookie
    Silver Subscribed

    Nov 2, 2014
    3,626
    Central FL/NW WI
    #8 JohnnyRay, Jan 20, 2019
    I just acquired a set of NF2s for my 550 as well. What will you be running for tires on yours?
     
  9. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,195
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #9 tazandjan, Jan 20, 2019
    What has worked well are MPSS in sizes 255/35 19 and 345/30 19. Nobody has had ABS problems with that combo. No PS4s suitable for the rears that are 12.5" wide.
     

Share This Page