Ferrari Tricolore Emblem and other mods. Thoughts? | FerrariChat
Buy

Ferrari Tricolore Emblem and other mods. Thoughts?

Discussion in 'California(Portofino)/Roma(Amalfi)' started by Fireman1291, Jan 21, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Fireman1291

    Fireman1291 Formula Junior
    BANNED Rossa Subscribed

    Oct 30, 2017
    695
    Tampa, FL
    Full Name:
    Adam
    #1 Fireman1291, Jan 21, 2019
    So I had some custom floor mats made in Alacantra with the Ferrari Tricolore stripe and text. I was thinking about getting this (https://www.ebay.com/i/323654683616?chn=ps) to add above the rear trunk lid emblem to tie it all in. I saw one on a 458 this weekend at cars and coffee and it looked great!

    The floor mats will be in Thursday and the car is getting Novitec Lowering Springs, ADV1 wheels, new tires, full frontal PPF, paint correction and Ceramic Pro 9H over the next two weeks. After that, she's done. I don't want to over do it but I need to update the looks a tad with small details and make it fresh. Thoughts on the tricolore badge on the trunk lid, yay or nay?

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login
     
  2. 4th_gear

    4th_gear F1 Rookie

    Jan 18, 2013
    4,425
    Full Name:
    Michael
    #2 4th_gear, Jan 21, 2019
    I love your tricolore mats. ;)

    Yes, I have that badge on my Cali30 and it looks great. IMO, it's quite subtle, classy and just completes the look, like the ones on your mat. Ferraris are the pride of Italy, completely designed and made in that country and so deserve to feature an Italian flag. So yay, go for it!

    There's just one caveat - the Cali trunk is curved across its width so unless the badge is custom-made for that location, you will have to carefully shape it for a perfect fit. It's not too difficult to do but should be done against a mould you make from the lid, and not on the actual trunk lid.
     
  3. tomc

    tomc Two Time F1 World Champ

    Apr 13, 2014
    26,056
    DFW, Texas
    Full Name:
    Tom C
    #3 tomc, Jan 21, 2019
    I think it'll look great on your black Cali. It'll give it a little pop of color. Great mats...T
     
  4. Fireman1291

    Fireman1291 Formula Junior
    BANNED Rossa Subscribed

    Oct 30, 2017
    695
    Tampa, FL
    Full Name:
    Adam
    #4 Fireman1291, Jan 21, 2019
    Very interesting! Do you happen to have closeup pics of yours? How did you do the mould?
     
  5. 4th_gear

    4th_gear F1 Rookie

    Jan 18, 2013
    4,425
    Full Name:
    Michael
    #5 4th_gear, Jan 21, 2019
    My garage is at 2°C and Spring is still 4 months out but here's a shot of my badge.


    As for making a mould, AFAIK it's always done by shaping a temporarily soft or a malleable material/gadget to the delicate surface and then copying or transferring the form of that mould onto something hard and sacrificial. You then place the final material, the badge in this case, against the hard sacrificial material and "make it fit". It's fun and rewarding to do so enjoy the process. A tuner that fit expensive aftermarket kits should also be able to fit the badge for you.
     
  6. Jongbeau

    Jongbeau Rookie

    Nov 10, 2018
    12
    Full Name:
    Jason Wang
    #6 Jongbeau, Jan 21, 2019
  7. Fireman1291

    Fireman1291 Formula Junior
    BANNED Rossa Subscribed

    Oct 30, 2017
    695
    Tampa, FL
    Full Name:
    Adam
    #7 Fireman1291, Jan 22, 2019
    Sure! I contacted [email protected] and I expressed some design ideas. He then rendered each version and I was able to really fine tune what I wanted. All down to the stitch color, materials, embroidery, etc. I never thought I'd buy bespoke floor mats for $575 but I guess I'll see if it was worth it Thursday when they show up!
     
  8. tomc

    tomc Two Time F1 World Champ

    Apr 13, 2014
    26,056
    DFW, Texas
    Full Name:
    Tom C
    #8 tomc, Jan 22, 2019
    I have mats from Andrew on my Cali as well. Worth the $$$. They really pep up the interior.

    @Jongbeau - somewhere on F-chat are a few threads with some of Andrew's work. I think it is in 458 section.

    T
     
  9. Fireman1291

    Fireman1291 Formula Junior
    BANNED Rossa Subscribed

    Oct 30, 2017
    695
    Tampa, FL
    Full Name:
    Adam
    #9 Fireman1291, Jan 22, 2019
    Don't hold out! Post some pics! ;)
     
  10. tomc

    tomc Two Time F1 World Champ

    Apr 13, 2014
    26,056
    DFW, Texas
    Full Name:
    Tom C
    #10 tomc, Jan 22, 2019
    Well, OK. Didn't wanna photo bomb your thread, but since you asked! [emoji2]

    Image Unavailable, Please Login
    Image Unavailable, Please Login

    Full disclosure, I saw a similar set for a 458 that Andrew did for another F-chatter. With my diamond stitched seats, I said, "I am so stealing that idea!" [emoji2]

    Did I see that you were installing black wheels? If so, any pics of them on the car?

    T
     
    BHMSOCCER likes this.
  11. Fireman1291

    Fireman1291 Formula Junior
    BANNED Rossa Subscribed

    Oct 30, 2017
    695
    Tampa, FL
    Full Name:
    Adam
    #11 Fireman1291, Jan 22, 2019
    Those look great!

    I'll post completed pictures in two weeks when she's all done. I can't wait!
     
  12. tomc

    tomc Two Time F1 World Champ

    Apr 13, 2014
    26,056
    DFW, Texas
    Full Name:
    Tom C
    #12 tomc, Jan 22, 2019
    They're the cherry on the sundae! Looking to seeing your pics of your tricked out Cali.
    T
     
  13. Fireman1291

    Fireman1291 Formula Junior
    BANNED Rossa Subscribed

    Oct 30, 2017
    695
    Tampa, FL
    Full Name:
    Adam
    #13 Fireman1291, Jan 22, 2019
    Ok, ordered the emblem for $160 shipped from myricambi.com!
     
  14. Fireman1291

    Fireman1291 Formula Junior
    BANNED Rossa Subscribed

    Oct 30, 2017
    695
    Tampa, FL
    Full Name:
    Adam
    #14 Fireman1291, Jan 25, 2019
    So yesterday I snapped some pics with my Sony A7rii of the car in it's stock form. And today it was lowered on Novitec Springs, swapped for ADV1 Wheels, Nitto rubber and I'm waiting on the center cap adaptors still to move the stock center caps over. But here's some porn for ya!

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login


    And now for some crappy iPhone pics from today!


    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Once the Ferrari caps get moved over those wheels will POP!

    Thoughts?
     
    daytona355 and tomc like this.

Share This Page