328 Radio Block Off Panel | Page 3 | FerrariChat

328 Radio Block Off Panel

Discussion in '308/328' started by Tifoso, Oct 27, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Gerry328

    Gerry328 Formula 3
    Silver Subscribed

    Sep 25, 2006
    1,849
    Home
    Full Name:
    Gerry
    Thanks for following up, no rush for me.
     
  2. Tifoso

    Tifoso Formula Junior
    Silver Subscribed

    Mar 8, 2005
    257
    Concord, NH
    Full Name:
    Carmine
    No rush at all for me either. If I haven't heard, I'll try again in another week or so to see if there's any update....
     
  3. Rossocorsa1

    Rossocorsa1 F1 Veteran

    May 14, 2017
    6,200
    I’m guessing he’s forging his own steel and fabricating his own vinyl.
     
    Rosey likes this.
  4. thorn

    thorn F1 Rookie
    Silver Subscribed

    Aug 7, 2012
    3,322
    Tallahassee, FL
    I'll just glance back at post #3. ;)
     
  5. Tifoso

    Tifoso Formula Junior
    Silver Subscribed

    Mar 8, 2005
    257
    Concord, NH
    Full Name:
    Carmine
    Last I heard from him (11/21/18), he was having trouble sourcing material for the back bracket that was 100% OEM correct, as requested by someone on this thread. I will check back in to see whether eliminating that issue will help to move this along. Personally, I don't care whether the back bracket material is OEM correct -- my focus is on the vinyl piece that is "front and center" in the console.... Will report what I hear back from him (if I hear back from him!).
     
    Gerry328 likes this.
  6. Rossocorsa1

    Rossocorsa1 F1 Veteran

    May 14, 2017
    6,200
    I tried him a couple times as well. No response.
     
  7. Rosey

    Rosey F1 Rookie

    Nov 5, 2015
    3,587
    Australia
    Full Name:
    Mark R
    Nothing still?
     
  8. Rossocorsa1

    Rossocorsa1 F1 Veteran

    May 14, 2017
    6,200
    Nothing. I’ve emailed him four times since mid November with no response. Oh well. If he surfaces, great. If not, I’m fine with my radio as is. It’s the original Alpine installed by the dealer at delivery. I understand we’re not high on his priority list, but a simple response would have nice, even to say he can’t do it. I did wonder if something had happened to him, which would be awful, but I do see he is still active on eBay.
     
    Rosey likes this.
  9. Tifoso

    Tifoso Formula Junior
    Silver Subscribed

    Mar 8, 2005
    257
    Concord, NH
    Full Name:
    Carmine
    No response on this end either. I asked him to let me know either way and thanked him for his time (and said we would understand if he was too busy, just let us know), but heard nothing back. We have definitely lost him; I hope he's ok....

    In any case, back to the drawing board! At least we have all of the dimensions in case one of us finds another possible source.... Anyone else have a lead?
     
  10. Rosey

    Rosey F1 Rookie

    Nov 5, 2015
    3,587
    Australia
    Full Name:
    Mark R
    I think we can close the case on dealing with this guy too.
     
  11. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    55,828
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    What EXACTLY DO YOU GUYS NEED?

    I'll try to help.

    I have both a 308 and 328 OEM plate laying around. Nope. Sorry, Not for Sale.

    The covering on the one he sent me is pretty much indistinguishable to my eyes from an original I have laying around so the material IS OUT THERE.

    I'll post a pic later.
     
  12. Rossocorsa1

    Rossocorsa1 F1 Veteran

    May 14, 2017
    6,200

    Some high res detailed images of the 328 plate would be great.
     
    Rosey likes this.
  13. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    55,828
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    Ok.

    Will do tomorrow nite.
     
    Rosey likes this.
  14. Rossocorsa1

    Rossocorsa1 F1 Veteran

    May 14, 2017
    6,200
    Would still love to see a few detailed pics of your 338 plate. Thanks.
     
  15. Rossocorsa1

    Rossocorsa1 F1 Veteran

    May 14, 2017
    6,200
    Shot “roboheros” another email just now to see if I could resurrect the idea of having some radio delete plates made. The guy just up and vanished after clearly indicating that he would do it. His store is active on eBay. We’ll see if I get a response.
     
    Rosey likes this.
  16. 375+

    375+ F1 World Champ
    Silver Subscribed

    Dec 28, 2005
    11,881
  17. mike996

    mike996 F1 Veteran

    Jun 14, 2008
    6,685
    Full Name:
    Mike 996
    Like the guy who was going to produce "slow down light' modules that never materialized and the Fabspeed claim of soon (several years ago) to be producing a 3x8 muffler that would produce 30+ more HP than OEM!

    The slow down light module build claim was at least technically possible; the Fabspeed claim...well, I've got perpetual motion machine plans that I'll sell cheap; also some bridges in Brooklyn... ;)
     
  18. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    55,828
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    YES, they are relevant AND a small Gold Mine' there.

    I forgot and will post grain 'close-ups.'

    My BAD.

    :(
     
    375+ likes this.
  19. Rosey

    Rosey F1 Rookie

    Nov 5, 2015
    3,587
    Australia
    Full Name:
    Mark R
    And the dimensions please.

    I'm guessing around 188mm x 64mm.
     
  20. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    55,828
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    Will do.
     
    Rosey likes this.

Share This Page