need a good repair shop for 1985 928s | FerrariChat

need a good repair shop for 1985 928s

Discussion in 'Porsche' started by bocaf430, Feb 9, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. bocaf430

    bocaf430 Formula 3

    Joined:
    Jun 10, 2014
    Messages:
    1,361
    Location:
    LI, boca raton
    I am in need of a good repair shop here on long island Suffolk county for a 1985 928s , I feel the car is not running as it should, stiff gas pedal, ac fan knob not working but a/c works and heat works when you slide it to defrost..but only fan is on high.. reverse lights not coming on and transmission I feel doesn't down shift as it should.... thank you
     
  2. cnpapa24

    cnpapa24 F1 Rookie

    Joined:
    Jan 19, 2014
    Messages:
    3,659
    Location:
    NOLA
    Full Name:
    Chris
    Check on Rennlist. I believe there is a fellow on there in Long Island.
     
  3. NYC Fred

    NYC Fred F1 World Champ Silver Subscribed

    Joined:
    Sep 28, 2010
    Messages:
    16,125
    Location:
    Fort Lauderdale, FL
    Full Name:
    Fred C
    http://www.rennwerke.com

    If you can make it to Westchester I can't recommend Cheech at Rennwerke highly enough.
    Have sent a number of Porsche buddies over there with terrific results.
    Right off the Cross Westchester in Elmsford.
     
  4. FiatRN

    FiatRN Formula Junior

    Joined:
    Nov 21, 2008
    Messages:
    319
    Location:
    Denver, CO
    Full Name:
    Jonathan Drout
    As above, check Rennlist o help locate quality locals.

    "stiff gas pedal, "
    Unless it has changed since you have owned it, this is often a 928 "feature." But make sure the cable isn't frayed - unhook it from the cross at the front of the engine and see how it feels when actuated by hand.


    "ac fan knob not working but a/c works and heat works when you slide it to defrost..but only fan is on high.."
    you might have magic-fan syndrome. That's usually the fan resisitor.


    "I feel doesn't down shift as it should"
    the kickdown cable likely needs adjustment.

    These should all be easy things for a 928 knoweldgeable wrench, or for a do-it-yourselfer if you so desire.

    Best luck and enjoy that '85!
     
  5. cgt000

    cgt000 Formula Junior Silver Subscribed

    Joined:
    May 2, 2014
    Messages:
    780
    Location:
    Northeast
    Carrera Car Shop. Peter Potzinger. Huntington Station
     
  6. bocaf430

    bocaf430 Formula 3

    Joined:
    Jun 10, 2014
    Messages:
    1,361
    Location:
    LI, boca raton
    thank you
     
  7. David_S

    David_S F1 World Champ Silver Subscribed

    Joined:
    Nov 1, 2003
    Messages:
    11,260
    Location:
    Mountains of WNC...
    Full Name:
    David S.
    Yeah, that's a LONG damn cable from pedal to throttle. My '83 was reasonably smooth, but my '87 S4 was pretty stiff. Lubricating the pulley up under/near the air filter box helped quite a bit.
     

Share This Page