Testarossa Diagnostic Sheets?

You can download a (corrected/notated) pdf copy or N. 6 (for the KE-Jet with Lambda injection) here:

https://www.dropbox.com/s/gm81j3cq3048qe1/TR Diagnosis Sheet N 6 US KE-Jet Injection.pdf?dl=0

The only other Diagnostic Sheet that applies to TR is N. 1 (for the MicroPlex ignition), but I haven't made a scan of that one yet.

 

Hey James would you mind posting a few pictures of your break out box?

 

Can you send the Diagnostic Sheet N 1

 

You can download a pdf copy with this link:

https://www.dropbox.com/s/b92n145onqihpb5/TR%20Diagnosis%20Sheet%20N%201%20US%20MicroPlex%20Ignition.pdf?dl=0

 

where exactly I can find the preset maps for the ignition time? Thanks for the sheet btw

 

The early euro F113A engine (K-Jet without Lambda and without Catalytic Converters) ignition map is shown on page D5 of the TR WSM.

The US version F113A040 engine (KE-Jet with Lambda and with Catalytic Converters) ignition map is shown on page D63 of the TR WSM (and at 1000 RPM warm idle you need to account for the throttle microswitch being closed).

What engine family TR are you dealing with, and why do you need these ignition maps? There may be another ignition map for the F113B engine (KE-Jet without Lambda and without Catalytic Converters), but I'd have to scan it (and it may be very similar to the F113A040 map).

 

It was all also printed in the Engine Diagnosis Service Training binder published by Ferrari North America.

I see them pop up for sale from time to time. It had the complete data for 308QV, 328, TR, 412, and whatever else was in production at the time
It covered all the versions of Digiplex, Microplex, K Jetronic, K Jetronic with Lambda and KE Jetronic.

They were given to everyone who went to engine diagnosis school in 87,88 or around there so quite a few were printed.