F355 Solenoid valve interchangeable part? | FerrariChat

F355 Solenoid valve interchangeable part?

Discussion in '348/355' started by Klas, Apr 11, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Klas

    Klas Formula Junior

    Joined:
    Mar 17, 2014
    Messages:
    364
    Location:
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
    Hi
    I need two new solenoid valves to my F355, one for the air injection system and one to my by-pass valve. Ferrari part id 159177 (same solenoid part to both systems)

    As this looks very much as a standard part there might be interchangable parts. Any ideas?
     
    Klas, Apr 11, 2019
    #1
  2. WATSON

    WATSON Two Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Sep 9, 2010
    Messages:
    23,680
    Location:
    WI
    WATSON, Apr 11, 2019
    #2
  3. johnk...

    johnk... F1 World Champ Owner

    Joined:
    Jun 11, 2004
    Messages:
    11,219
    Location:
    CT
    Full Name:
    John Kreskovsky
    johnk..., Apr 11, 2019
    #3
  4. Qavion

    Qavion F1 World Champ Silver Subscribed

    Joined:
    Feb 20, 2015
    Messages:
    14,272
    Location:
    Sydney
    Full Name:
    Ian Riddell
    Qavion, Apr 11, 2019
    #4
  5. F456M

    F456M F1 Rookie

    Joined:
    Jan 8, 2010
    Messages:
    3,696
    Location:
    Oslo
    Full Name:
    Erik
    I bought this at the local BMW dealer in France while I was there. It is the same with the same connector (several connectors exist, but this is a direct fit). Paid only 25 euro for it! I believe it is for several of the early 90ies BMWs like E36, E34 and E32. They run out of 12 V, and not 5V as most of the engine management do. Same for the original Ferrari valve. It is also 12V. So to make things easy, I removed the old valve at the rear under the car, fittet the vacuum hose directly to the T where one vacuum line goes to each muffler, and then installed the new "BMW" valve right next to the battery where the long hose goes to the rear from the accummulator tank. Took the wire in along the main wiring loom into the back side of the dash where all the cables go to the fuese box and wired it right onto the new EXHST switch I got laser etched from Czech Carplastix. Works like a champ! It is great to be able to open and close manually regardless of running conditions. You have to drive like an idiot on public roads to make the flaps open in standard configuration.
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
    F456M, Feb 17, 2022
    #5
    Qavion likes this.
  6. m.stojanovic

    m.stojanovic F1 Rookie Silver Subscribed

    Joined:
    Dec 22, 2011
    Messages:
    3,222
    Location:
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    m.stojanovic, Feb 17, 2022
    #6
    F456M likes this.

Share This Page