Can any one help with pinouts (four plugs) on a 575 dashboard binnacle,thanks.
Probably the only people with that kind of info are at FAI. They may not give it to you, but they can definitely fix your instrument panel. Franchorchamps of America, Inc. 935 Sunset Dr Suite A Costa Mesa, CA 92627 (949) 631-6373 Rod Drew [email protected] Will White http://www.ferrarioc.com/
The fault was no backlight,with ignition the high voltage circuit is supplied with two voltages,one about 10volts the other is a PWM controlled from the two rocker buttons on the dash.There was no output from the micro to drive the PWM circuit so i just biased that circuit on from the 5 volt regulator.It just means there is no brightness control of the backlight.No big deal.
