seals solenoid valve from F1 box control | FerrariChat

seals solenoid valve from F1 box control

Discussion in '360/430' started by concetti, Jun 18, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. concetti

    concetti Rookie

    Joined:
    Apr 10, 2018
    Messages:
    13
    Full Name:
    CONCETTI Michel
    concetti, Jun 18, 2019
    #1
  2. mike01606

    mike01606 Formula Junior

    Joined:
    Feb 21, 2012
    Messages:
    794
    Location:
    Cheshire UK
    Full Name:
    Mike M
    They're not available as spare parts. Just size them and replace with generic O-rings....
     
    mike01606, Jun 18, 2019
    #2
  3. concetti

    concetti Rookie

    Joined:
    Apr 10, 2018
    Messages:
    13
    Full Name:
    CONCETTI Michel
    ok thanks you
     
    concetti, Jun 24, 2019
    #3
  4. Jgivoo

    Jgivoo Formula Junior Silver Subscribed

    Joined:
    Jan 22, 2016
    Messages:
    437
    Location:
    New Jersey
    If you decide to replace the O rings, make sure they are made of material that withstands the properties of the F1 fluid.

    Give Magneti Marelli US division a call and see if they can help you. They should have a direct line with the main company.
    Tel +1 248-418-3000
     
    Jgivoo, Jun 24, 2019
    #4
    whatheheck likes this.
  5. mike01606

    mike01606 Formula Junior

    Joined:
    Feb 21, 2012
    Messages:
    794
    Location:
    Cheshire UK
    Full Name:
    Mike M
    The F1 fluid is just ATF so as long as the o-rings can withstand that they will be fine.
    There is a thread on here where this was covered in detail.
    I’ll see if I can find it and link it.
    The solenoid valves are actually supplied by Eaton.
     
    mike01606, Jun 26, 2019
    #5
    whatheheck likes this.
  6. mike01606

    mike01606 Formula Junior

    Joined:
    Feb 21, 2012
    Messages:
    794
    Location:
    Cheshire UK
    Full Name:
    Mike M
    mike01606, Jun 26, 2019
    #6
    whatheheck likes this.
  7. vrsurgeon

    vrsurgeon F1 World Champ Silver Subscribed

    Joined:
    Dec 13, 2009
    Messages:
    16,528
    Location:
    Charleston, SC
    Full Name:
    Curt
    I'd go to harbor freight and get those boxes of O-rings, throw them in some Power Steering fluid and see if they degrade.
     
    vrsurgeon, Jun 26, 2019
    #7
  8. concetti

    concetti Rookie

    Joined:
    Apr 10, 2018
    Messages:
    13
    Full Name:
    CONCETTI Michel
    ok i found it
    https://ferrarichat.com/forum/threads/355f1-solenoid.576140/page-3
     
    concetti, Jun 27, 2019
    #8

Share This Page