360 conversion | Page 15 | FerrariChat

360 conversion

Discussion in '360/430' started by RANDY6005, May 19, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 15 of 76
  1. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    I have not added all up yet but I but a rough guess 90,000.00 with labor and parts I even found CS doors so the carbon door panels would fit perfect and I replace every single wire harnesses with brand from Italy so every thing would plug and play work. I not once have to solder on wire all relays and fuse came with the new harnesses Race mode Launch control would work
     
    RANDY6005, May 21, 2019
    #351
    Natkingcolebasket69 likes this.
  2. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    RANDY6005, May 21, 2019
    #352
    Natkingcolebasket69 likes this.
  3. jg360

    jg360 Formula Junior

    Joined:
    Feb 8, 2018
    Messages:
    320
    Location:
    New Jersey
    Full Name:
    John Gurrieri
    Randy. What did you do to install the 4 point Haynes to the fire wall. I just purchased a set and wasn’t sure how to connect and the location. I also need to find the opening finish trim pieces.


    Sent from my iPhone using FerrariChat.com mobile app
     
    jg360, May 21, 2019
    #353
  4. Natkingcolebasket69

    Natkingcolebasket69 F1 World Champ

    Joined:
    Jul 2, 2017
    Messages:
    10,231
    Location:
    Miami and Bay Area
    Great work!


    Sent from my iPhone using Tapatalk
     
    Natkingcolebasket69, May 21, 2019
    #354
    RANDY6005 likes this.
  5. duck.co.za

    duck.co.za Formula 3

    Joined:
    Jan 9, 2007
    Messages:
    1,005
    Location:
    Cape Town South Afri
    Full Name:
    Dave
    Awesome , impressed how you find all the bits , great job .
     
    duck.co.za, May 22, 2019
    #355
    RANDY6005 likes this.
  6. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    Hey JG360 you are in luck !! I have pics of a factory measurements and how they are fitted up . I had Neil at Eurospares take pictures from a CS car that was parted out, because if not done correctly if ever in a car accident you do not want the harnesses to pull threw the rear panel. We put 1/2 aluminum plates welded in front and spot welded rear 1/2 in plates from behind inside engine compartment and we used nut insert so we could align the belts and then bolted from behind, way over kill on my install but safe hope this helps.
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
    RANDY6005, May 23, 2019
    #356
  7. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    RANDY6005, May 23, 2019
    #357
  8. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    RANDY6005, May 23, 2019
    #358
  9. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    JG360 If you have the factory four points harnesses the trim pieces are already on the belts they are bezels just cut yours out to fit..
     
    RANDY6005, May 23, 2019
    #359
  10. jg360

    jg360 Formula Junior

    Joined:
    Feb 8, 2018
    Messages:
    320
    Location:
    New Jersey
    Full Name:
    John Gurrieri
    It didn’t come with the trim pieces. I thick they from another Ferrari. Anyways thanks for the pics and that info.


    Sent from my iPhone using FerrariChat.com mobile app
     
    jg360, May 23, 2019
    #360
  11. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    RANDY6005, May 23, 2019
    #361
  12. jg360

    jg360 Formula Junior

    Joined:
    Feb 8, 2018
    Messages:
    320
    Location:
    New Jersey
    Full Name:
    John Gurrieri
    jg360, May 23, 2019
    #362
  13. 24000rpm

    24000rpm F1 Rookie

    Joined:
    Aug 31, 2012
    Messages:
    4,653
    Location:
    China and California
    Randy, the factory roll-bar has 4 bolts to each end. (to fasten to the chassis)

    where did you get those 8x bolts? Do you have any pics?
     
    24000rpm, May 25, 2019
    #363
  14. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    Hey 240000rpm a very good friend Mike Ferran he has a CS car he bought over 12 years had a factory Titanium roll bar used it as a temp plate and has been making these for years now he even has the factory bracket plates that has to be welded in so you can bolt it here is a link with pics http://www.ferranautomotive.com/rollbar.html
     
    RANDY6005, May 25, 2019
    #364
  15. 24000rpm

    24000rpm F1 Rookie

    Joined:
    Aug 31, 2012
    Messages:
    4,653
    Location:
    China and California
    i see!
    here's what happened to my factory CS roll bar bolts:

    out of total of 8 bolts, i miss one. So i looked up eurospare and bought an OEM bolt, which looks the same as that in the link you provided

    however, the original bolts that i have on my car is totally different, I wonder which of the following scenario is true:

    1. my original bolts on the car are OEM and ferrari changed the bolts down the road
    2. my original bolts are just random replacement from original owner



     
    24000rpm, May 25, 2019
    #365
  16. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    My guess would be wend it was having a major service the mechanic lost the two and then went threw his his piles of bolts from other cars . I can tell you wend I did my build I had to order almost every fastener new from Euorspares none of mind match it was a joke at what previous mechanics had done
     
    RANDY6005, May 25, 2019
    #366
  17. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    The first picture is a 2004 CS own by a good friend of mine Mike Ferran weighing at 2854 pounds , corner weighting in the rear 873 from 845 weight difference 28 pounds.. The front weighing at 583 from 553 difference 30 pounds. Second picture is my CS conversion at MaseEingneering 2770 pounds front 585 to 567 difference 18 pounds. The rear 804 to 814 difference 10 pounds 84 pounds lighter
    Image Unavailable, Please Login Image Unavailable, Please Login
     
    RANDY6005, Jun 4, 2019
    #367
    spiderscott and 360trev like this.
  18. 360trev

    360trev F1 Rookie Project Master

    Joined:
    Oct 29, 2005
    Messages:
    4,330
    Location:
    Gibraltar
    Full Name:
    360trev
    EXCELLENT... Makes all the difference to the way these cars feel, depending on levels of fuel and washer bottles you may be even lighter still
     
    360trev, Jun 4, 2019
    #368
    RANDY6005 and spiderscott like this.
  19. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    RANDY6005, Jun 28, 2019
    #369
    360trev likes this.
  20. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    RANDY6005, Jul 22, 2019
    #370
    tifosi101 and 360trev like this.
  21. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    RANDY6005, Sep 9, 2019
    #371
    tifosi101, remfrs and G. Pepper like this.
  22. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    RANDY6005, Sep 9, 2019
    #372
    24000rpm, Dbacr, JoeTSI and 1 other person like this.
  23. Freddan

    Freddan Formula 3 Rossa Subscribed

    Joined:
    Sep 16, 2012
    Messages:
    2,394
    Location:
    Vansbro (Sweden)
    Full Name:
    Fredrik
    very glad every time you post updates!

    keep up the good work!
     
    Freddan, Sep 11, 2019
    #373
    RANDY6005 likes this.
  24. 02360spider

    02360spider Formula 3

    Joined:
    May 27, 2015
    Messages:
    1,753
    Location:
    Dartmouth
    Full Name:
    Richard oliveira
    What is the difference in the header connection pipe color?

    Sent from my SM-N975U using Tapatalk
     
    02360spider, Sep 12, 2019
    #374
  25. 24000rpm

    24000rpm F1 Rookie

    Joined:
    Aug 31, 2012
    Messages:
    4,653
    Location:
    China and California
    i dont think there's any.

    and I don't know what function does this thing serve. Is it like a PCV valve in regular cars?

     
    24000rpm, Sep 12, 2019
    #375
Page 15 of 76

Share This Page