355 - About wheel installing | FerrariChat

355 About wheel installing

Discussion in '348/355' started by Filippo7673, Jan 10, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Filippo7673

    Filippo7673 Rookie

    May 19, 2013
    19
    New York
    Full Name:
    Filippo Barone
    #1 Filippo7673, Jan 10, 2020
  2. 2NA

    2NA F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 29, 2006
    18,214
    Twin Cities
    Full Name:
    Tim Keseluk
    #2 2NA, Jan 11, 2020
    It's not uncommon for the bolt with the projecting pin to interfere with some aftermarket wheels. One or both can be removed if necessary.
     
  3. Filippo7673

    Filippo7673 Rookie

    May 19, 2013
    19
    New York
    Full Name:
    Filippo Barone
    #3 Filippo7673, Jan 11, 2020
    Really ty just was not sure what they were for im new to the ferrari world


    Sent from my iPhone using FerrariChat.com mobile app
     
  4. 97 Spider

    97 Spider Formula 3
    Rossa Subscribed

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    #4 97 Spider, Jan 11, 2020
    They are just there to keep the rotors lined up with your threaded lug bolt holes. If when installing your rim and the rotor turns on the hub it can be very frustrating getting it lined up again and a lug bolt started. If you use the wheel installation pins from a company like Sticky RX then it makes it easy and keeps everything aligned.
     
  5. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    1,949
    NE FL
    Full Name:
    Ken
    #5 kenneyd, Jan 11, 2020
    Mine has rubber grommets on them, they don't seem to clear my challenge wheels. So I removed them before installing those wheels
     

Share This Page