Please help me ID this Ferrari hood

Bought this years ago with some other parts and would like to sell it, but not sure where it came from. It's aluminium (OK, i'm not sure it came from a car registered in the UK). As the photos show, the hood latch is stamped "935", but a paper tag says "3302"...not a street car. OK, sleuths go at it. thanx steve meltzer
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Looks like a 330 GT 2+2 Series 1 4 headlight bonnet/hood.

 

It doesn’t make sense.

Matt

 

Could also be a 330 GT 2+2 Series 2 2 headlamp bonnet/hood.

 

this hood looks like a hood from a street and not a race car because of the former isolation has been on

 

Raab book says #935 is 330 GT III ie 2 headlight but the little pop up leaf springs usually not applicable to this model.

 

Ah...

Paper tag does not say 3302. It’s missing something. It originally said 330 2+2.

If it’s from a 330 2+2, it’s a four headlight Series I. A Series II doesn’t taper as much toward the front.

Ours:

Image Unavailable, Please Login

Matt

 

Good eye, Matt. With your "ColUmbo" eyes I think you're right! One can almost make out the "+2" that's missing. Thanx again. steve

 

330 GT 2+2 Chassis #08993, originally delivered to official dealer M. Gastone Crepaldi S.a.s. in Milan, originally painted Azzurro 19278 M with Nero Franzi leather interior, first owner Mr. Saleri in Milan.

Marcel Massini

 

Thanx so much Marcel. Is that a 4 headlight car or 2? Ironically, that was the car just in front of my GTC, #8995, on the line! I've sent you a PM, so pleae be on the look out for it. thanx again.steve

 

Two headlights.
PS: Cars were not built by chassis number on the assembly line.

Marcel Massini

 

thanx, Marcel...and I appreciate the correction of my ignorance. steve

 

Hi Marcel,
I hate to dispute you, but the chassis is 6137. Remember that the 330 2+2 stamped PF body number is 300 off the Allestimenti numbers. So this is 68935 for the PF job number or 235 for the Allestimenti number. Probably originally red/black based on pictures from a May 1966 FCA meet in Michigan.
This also matches the spring clips at the rear of the hood as those were on the 4HL model, not on the 2HL cars.
Also, 6137 was reported as in an accident in summer of 1967, needing a new roof panel and other body parts. So, possibly parted out (or this is the old hood and a new one purchased). However, 6137 has not surfaced since then.
Regards, Kerry

PS, Steve, you should update your eBay ad.

 

Excellent, Kerry, thanks for the correction.
6137 was originally Rosso Cina with Nero VM 8500 interior and sold new to Mr. Pretz in USA.
Assembly number is 235.

Marcel Massini

 

Kerry, brilliant as usual !!!!!!!!!!!