Does any one know what brand is this cable tie?

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

No, but I do not use anything other than Thomas & Betts

 

these are untied from a late run 360's engine v-valley harness. I really want to buy identical ties to keep the car's originality

 

https://www.automationdirect.com/adc/shopping/catalog/wiring_solutions/sapiselco_-_cable_ties_-a-_accessories/cable_ties_-_stainless_steel_tooth_(black)


It took a lot of searching, but I found the logo on the cable tie.... Enjoy

https://www.sapiselco.com/en/products/

 

https://www.sapiselco.com/en/

 

you guys are just GREAT.

How to search a logo? I'd like to learn that skill

 

Google is my friend, when it comes to searching.
When preparing my 1978 308 GTS for preservation judging, I found the original cable ties for it manufactured by Legrand Colson in France. I had to go through a USA company who purchased it from a UK company. The UK company purchased it from the French manufacturer. Matches the 308 parts book. Used for 70-80s. Dino, Daytona, Boxer, 308, etc.


Image Unavailable, Please Login Image Unavailable, Please Login

 

how does google search a logo? You put the logo into a jpg and search?

 

No, not by inputting a logo. I searched using this: words were... plastic nylon black cable tie

https://www.google.com/search?q=plastic+nylon+black+cable+tie&tbm=isch&ved=2ahUKEwjJ2NvSocXoAhWKmZ4KHWYdDAkQ2-cCegQIABAA&oq=plastic+nylon+black+cable+tie&gs_lcp=CgNpbWcQAzoGCAAQBxAeOggIABAIEAcQHjoICAAQBxAFEB46AggAOgYIABAFEB46BggAEAgQHlDl6gFY-54CYO-kAmgCcAB4AIABVYgBiQuSAQIyMZgBAKABAaoBC2d3cy13aXotaW1n&sclient=img&ei=NYGDXonqL4qz-gTmurBI&bih=755&biw=1600

When I got the results, I clicked on Images and visually scanned every photo until I saw the logo you provided. Time consuming, but it works. This is how I found my Colson Legrand cable ties.

 

wow, thanks a bunch for your time.

 

ok, for 360 owners, I've confirmed that early 360s use ty-rap cables and very late 360s use sapiselco cables.
I'll check and see what cable was used on stradales

 

FYI... link to purchase Colson Legrand cable ties for 70-80 Ferraris in US.

https://www.newark.com/c/cable-wire-cable-assemblies/cable-management?brand=legrand

 

have you ever encountered scenarios where the parts diagram doesn't have a pointer for the part? Like a clip was omitted and there's no part # so you can't order?

 

Yes,, for example the positive battery cable shown in the 78 308 Catalog shows the plastic boot which covers the battery terminal, but has no number for it since it is a part of the positive battery cable when ordered.
Provide an example you are looking at.

 

On f430's valve cover. There's a metal bracket screwed to it. On the bracket , there's a plastic clip.
The bracket and clip aren't shown on the diagrams. I bought the whole valve cover and these aren't included.

https://www.ricambiamerica.com/car-diagrams/ferrari/v6-v8/430-group/430-scuderia/r-h-cylinder-head.html

Image Unavailable, Please Login Image Unavailable, Please Login

 

Reviving this thread as I'm trying to find the plastic clip/bracket as well. Anyone have any luck? Any other sources for the part?

 

Based on the posts above yours, I would start here:

https://www.sapiselco.com/en/#

https://www.sapiselco.com/wp-content/uploads/SapiSelco_Pocket.pdf

 

Those are the exact ones used for the BBi rubber brake caliper hose pairs. You have to pay very close attention to how they are originally oriented. Very unique wrap job!