All, Looking to see what people have used to replace their BIG airbag steering wheels. I know the early steering wheel is a go to, but I do like the Momo Mod. 07 or Prototipo. Momo Mod. 07 This wheel has a bit of dish and centre mark. Image Unavailable, Please Login Momo Prototipo No dish and No centre mark Image Unavailable, Please Login Does anyone have any experience of either of these wheels. Thanks.
https://www.pegasusautoracing.com/productselection.asp?Product=MO-MCL35AL1B&utm_source=google&utm_medium=cpc&utm_campaign=MO-MCL35AL1B&gclid=EAIaIQobChMI-PCB0L6n6gIVWiCtBh3XLw9EEAQYAyABEgKfbfD_BwE This is what I personally have. The ones above are nice, but a little too vintage for my personal tastes.
I happen to have one lying around (spare for my race car), which adapter did you use to install in the 355? thanks.
Momo Club 3, discontinued in the late '90's using a Challenge adapter and a 10 ohm resistor in the airbag circuit JD Image Unavailable, Please Login
I have a modd'd stock wheel on the car (and an original stock wheel in a closet). The one I keep on my car looks good and feels great, it's sort of "chunky" and has a great feel to it. Apologies for all the glare. Image Unavailable, Please Login
I fitted a 360 wheel on my 355, airbag is wired in and working (i assume as no fault light), no modifications necessary. more details in my thread, page 10 https://www.ferrarichat.com/forum/threads/decided-to-give-my-f355-berlinetta-some-tlc.443507/page-10 cheers Mark Image Unavailable, Please Login
Agreed on the 360 steering wheel. It's plug and play, looks and feels great and is the best modification I've done to my 355. Dan
The 360 wheel loos great, swear I’ve seen the 360 wheel in F355 before but it looked a lot more chunky.
That 360 wheel does look like a perfect option, actually. I'm always worried about the ancient airbag in my current wheel exploding in my face.
That original first generation airbag is one of the main reasons I wanted a different steering wheel. Those large airbags were responsible for a lot of injuries back when they were new and they can’t be any better now that they are over 20 years old. Dan
https://www.eurospares.co.uk/parts/ferrari/360-modena/suspension-steering/steering-column-40682 anyone know the right part #?
I have the black with the red stitching one https://www.eurospares.co.uk/parts/ferrari/360-modena/suspension-steering/steering-column-40682/66203901 but any of the ones they list would work. Most of the others listed are just color choices. Dan
Just resurrecting this thread. Can someone confirm the resistor specs for installing a non-airbag wheel into an airbag car? I see 10 ohm mentioned?
I’ve read it's 3.3 ohm, but worth checking. I used a resistor but it stopped working, so pull the blub for now. Will source some more resistors and try again. Image Unavailable, Please Login
3.3 ohm 1/2 watt is what I found and makes sense. 10 ohm seemed high to me. My 964 similar, slightly lower resistance.
Image Unavailable, Please Login The MOMO Dark Fighter looks kind of like the pre airbag steering wheels.