Can get you the pin out’s for 612. Same cluster, so most pins will be the same. Not sure if there are any GPIO’s that could be different. Sent from my iPhone using FerrariChat
Yes, pin out of a 612 cluster would be of great help. Thanks ! I am just looking at the pins for power suplies in order to power it up and repair the backlight. I have not yet the 599 cluster in my hands. I will probably be able to identify these pins from the circuit but I would like to double check.
Sorry if I was not clear enough. I am looking at the pin out of a 599 cluster. I would like to know the function of each pin on the connectors ... or at least which pins to use to power it up (+30, +15 and GND).
Eric- You might try Rod at FAI and see if he has anything. Franchorchamps of America, Inc. 935 Sunset Dr Suite A Costa Mesa, CA 92627 (949) 631-6373 Rod Drew [email protected]
See below from Ferrari diagnostic software for 612: Image Unavailable, Please Login Sent from my iPhone using FerrariChat
Connector A: Pin 1 - +30 (battery voltage) Pin 2 - +15 (ignition live) Pin 3 - ground They made it nice and easy for a change. Image Unavailable, Please Login Sent from my iPhone using FerrariChat