Strange rattling at 1600 RPMs | FerrariChat

Strange rattling at 1600 RPMs

Discussion in 'California/Portofino/Roma' started by GNU, Sep 29, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. GNU

    GNU Rookie

    Sep 28, 2014
    27
    #1 GNU, Sep 29, 2020
    I’ve got a 2012 California that is due for its 20k service that has developed a rattling metallic sound from underneath somewhere every time it’s been run warm and passes 1600 RPM.
    No noise at all at any other RPMs.
    No noise when revving past that RPM in neutral.

    Does anyone have any idea of what could be causing the rattle?

    I’m thinking a lose heat shield for the exhaust would make noise at other RPMs too?!
     
  2. tomc

    tomc Two Time F1 World Champ

    Apr 13, 2014
    25,884
    DFW, Texas
    Full Name:
    Tom C
    #2 tomc, Sep 29, 2020
    Engine mounts going bad?
    T
     
    russellmcg likes this.
  3. GNU

    GNU Rookie

    Sep 28, 2014
    27
    #3 GNU, Sep 29, 2020
    Thanks!
    I think you could be right.
    It’s been 2 years since I swapped them and I have been feeling the vibrations slowly coming back so I think it’s time to replace them again.

    I’ll report back with findings after I swapped them out.
     
  4. tomc

    tomc Two Time F1 World Champ

    Apr 13, 2014
    25,884
    DFW, Texas
    Full Name:
    Tom C
    #4 tomc, Sep 29, 2020
    Hmm. If it's been 2 years, how many miles since then?
    T
     
  5. Il Co-Pilota

    Il Co-Pilota F1 Veteran

    May 29, 2019
    6,023
    Hopefully some place nice.
    Full Name:
    A.B
    #5 Il Co-Pilota, Sep 29, 2020
  6. Sammi

    Sammi Karting

    Aug 8, 2020
    102
    Las Vegas
    Full Name:
    Samantha (Sammi)
    #6 Sammi, Sep 29, 2020
    Had a similar issue recently, it was the engine mounts. Had them replaced and now completely smooth.
     
  7. tomc

    tomc Two Time F1 World Champ

    Apr 13, 2014
    25,884
    DFW, Texas
    Full Name:
    Tom C
    #7 tomc, Sep 29, 2020
    That's right. Could not recall where I saw it. Thanks.
    You also were able to save a few $$$ by shopping around dealer and independents, no?
    T
     
    Sammi likes this.
  8. Sammi

    Sammi Karting

    Aug 8, 2020
    102
    Las Vegas
    Full Name:
    Samantha (Sammi)
    #8 Sammi, Sep 29, 2020
    It ended up being approx ~$1400 with parts and labor. I went to a local service shop that specializes in Exotics rather than through a Ferrari dealership directly. The parts were ordered from Scuderia.
     
    tomc and BLAMPEE like this.
  9. Motob

    Motob Formula 3
    Professional Ferrari Technician

    Nov 11, 2003
    2,238
    Frederick, Maryland
    Full Name:
    Brian Brown
    #9 Motob, Oct 17, 2020
    It sounds like one or both of the exhaust damping weights has separated and is vibrating. They are large rubber cylinders (about the size of skateboard wheels) that are bonded to a metal mount which is bolted to the middle of the exhaust system. They change the harmonic frequency of the exhaust system in order to reduce noise/vibration. With time the rubber comes un-bonded from the metal mount, and they make a rattle at a specific RPM.

    You can see if they are loose and remove them from the exhaust to see if the noise goes away. They are on the pricey side (part# 252174, $200 each).

    Brian Brown
    San Francisco Motorsports
     
    tomc, Patricia2020 and GNU like this.
  10. Mafiaboy1975

    Mafiaboy1975 Formula Junior

    Aug 10, 2019
    258
    South Africa
    Full Name:
    Mick
    #10 Mafiaboy1975, Oct 18, 2020
    I had a buzz at 2800 rpm. Swore it was the exhaust heat shields. Fiddled until blue in the face no luck. Then my kids hopped in the back and the buzz was gone. Turns out it was a seatbelt clip... damn did I spend time under that car looking for a buzzing heat shield. ... oh well. It at least it’s gone now. Lol


    Sent from my iPhone using FerrariChat
     
    GNU likes this.

Share This Page